Thread: YASU(v1.6.9040)_isn't properly detecting VirtualDrives when Phy.CD/DvD's are disabled

Page 1 of 2 12 LastLast
Showing results 1 to 10 of 12
  1. #1
    New User Melchior's Avatar
    Join Date
    01.05.2009
    Posts
    11

    Default YASU(v1.6.9040)_isn't properly detecting VirtualDrives when Phy.CD/DvD's are disabled

    When I Recently upgraded Daemon Tools to (v4.30.4) I had also looked to see if there was a new version of YASU that would take care of our image mounting issue with Far Cry 2, but we keep our only physical CD/DvD drive disabled by default because it interferes with some of the other games anyway. Because {D:\} was assigned to the 1st virtual Drive in most cases. (the use of the 'D' drive letter by a virtual drive might be irrelevant next to the following fact) Its more likely because no Physical Drives are available\Enabled YASU is assuming that the 1st drive is automatically a Physical drive.

    So with part of that in mind, I redid the Drive Labels re-assigning {D:\} from Daemon Tools as a Virtual Drive back
    to our Physical Optical DVD-Drive and setting Daemon Tools to one Virtual Drive taking the Drive Letter {F:\}. By Default we keep our Physical DVD-Drive Disabled.

    As the below log shows with the physical drive {D:\} disabled YASU does not properly detect Daemon Tools's {F:\} drive as a virtual drive as it should, and does not properly cloak it. This should be looked into, YASU should not be assuming if it only sees one optical drive that that drive is a physical drive, also before I resigned {D:\} back to the physical drive and when I had more then one virtual enabled, YASU assumed the virtual drive that had the D:\ drive letter was a physical drive and ignored it.
    Code:
    17:06:38	Y.A.S.U v1.6.9040 started...!
    17:06:38  DAEMON Tools Lite v4.30.4.27
    17:06:38  Microsoft Windows XP v5.1 (Build 2600: Service Pack 2)
    17:06:38  Locale: English (United States)
    17:06:38  Detected 1 optical device(s), 
                    1 physical & 0 virtual device(s)
    	
    17:06:41  * Cloaking procedure started.
    17:06:41  0 device(s) successfully cloaked from SafeDisc 4.xx: 
    17:06:41    [ F:\ ] Status = Ignored (does not require updating)
    17:06:41  1 device(s) successfully cloaked from SecuROM 7.xx: 
    17:06:41    [ F:\ ] Status = Successful
    17:06:41  * Cloaking procedure completed.

    Also when I attempted to de-cloaked and re-cloaked it, YASU refused to cloak it all... Whats with that?
    (note: no Physical drive enabled).
    Code:
    17:28:38  Y.A.S.U v1.6.9040 started...!
    17:28:38   DAEMON Tools Lite v4.30.4.27
    17:28:38   Microsoft Windows XP v5.1 (Build 2600: Service Pack 2)
    17:28:38   Locale: English (United States)
    17:28:38   Detected 1 optical device(s), 
                     1 physical & 0 virtual device(s)
    
    17:28:44  * Cloaking procedure started.
    17:28:44    0 device(s) successfully cloaked from SafeDisc 4.xx: 
    17:28:44   [ F:\ ] Status = Ignored (does not require updating)
    17:28:44    0 device(s) successfully cloaked from SecuROM 7.xx: 
    17:28:44    [ F:\ ] Status = Ignored (does not require updating)
    17:28:44  * Cloaking procedure completed.
    _____________________________________
    Here are the system Specs Requested.
    Code:
    * The bug/problem (obviously)
    * We use Windows XP Pro 
       (SP2 + all Updates applied except for SP3)
    * DAEMON Tools Lite (v4.30.4)
    * There is no Other CD/DVD emulation 
        installed or burning SW installed.
    * only Norton Anti-Virus for now....
    
    * Asus P5NSLI (v2.0)(CPUID says v1.xx)
    * nForce 4 SLI RevA3, nForce 410/430
    * 3.4 GHz Pentium D 945
    * Nvidia 7900 GS 256MB
    * SoundMAX Integrated HD Audio
    -----------------------------------------------------

    Well its great to finally to be here on the Daemon Tools Forums. I love Forums because it grants all of us the time and place to chat with actual Developers and all sorts of people from around the world, to talk and discuss ways to improve software and fix many of the bugs that software unfortunately tend to have (no worries, lets just do our best ). I look forward to my time here, well spent. ^^

  2. #2
    Experienced User

    Join Date
    27.09.2005
    Posts
    821

    Default

    hmm, you rebooted after changing the drive letters?

    because, if you didn't, it might be an idea to do so, because the registry information may not have been updated, and yasu works from some of that...

    just an idea though, i might be wrong (i am human after all), and im sure syk0 will check this post and reply to it as soon as he's aware
    my views are 100% personal views..

  3. #3
    New User Melchior's Avatar
    Join Date
    01.05.2009
    Posts
    11

    Default

    I did reboot after Installing Daemon Tools (v4.30.4) for a second time, before which CoD4 Image mounted but failed Auth, after which it worked fine...

    I just tested one of our PCs, it had the Physical Drive {D:\} Enabled and the Virtual Drive as {F:\}... I got this log.
    Code:
    15:58:07  Y.A.S.U v1.6.9040 started...!
    15:58:07  DAEMON Tools Lite v4.30.4.27
    15:58:07  Microsoft Windows XP v5.1 (Build 2600: SP2)
    15:58:07  Locale: English (United States)
    15:58:07  Detected 2 optical device(s), 
                1 physical & 1 virtual device(s)
    	
    15:58:10 * Cloaking procedure started.
    15:58:10 1 device(s) successfully cloaked from SafeDisc 4.xx: 
    15:58:10  [ D:\ ] Status = Ignored (does not require updating)
    15:58:10  [ F:\ ] Status = Successful
    15:58:10 0 device(s) successfully cloaked from SecuROM 7.xx: 
    15:58:10  [ D:\ ] Status = Ignored (does not require updating)
    15:58:10  [ F:\ ] Status = Ignored (does not require updating)
    15:58:10 * Cloaking procedure completed.
    	
    15:58:26 * Cloaking procedure started.
    15:58:26 0 device(s) successfully cloaked from SafeDisc 4.xx: 
    15:58:26  [ D:\ ] Status = Ignored (does not require updating)
    15:58:26  [ F:\ ] Status = Ignored (does not require updating)
    15:58:26 0 device(s) successfully cloaked from SecuROM 7.xx: 
    15:58:26  [ D:\ ] Status = Ignored (does not require updating)
    15:58:26  [ F:\ ] Status = Ignored (does not require updating)
    15:58:26 * Cloaking procedure completed.
    	
    15:58:33 * Uncloaking procedure started.
    15:58:33 1 device(s) successfully uncloaked from SafeDisc 4.xx:
    15:58:33  [ D:\ ] Status = Ignored (does not require updating)
    15:58:33  [ F:\ ] Status = Successful
    15:58:33 1 device(s) successfully uncloaked from SecuROM 7.xx: 
    15:58:33  [ D:\ ] Status = Ignored (does not require updating)
    15:58:33  [ F:\ ] Status = Successful
    15:58:33 * Uncloaking procedure completed.
    	
    15:58:36 * Cloaking procedure started.
    15:58:36 1 device(s) successfully cloaked from SafeDisc 4.xx: 
    15:58:36  [ D:\ ] Status = Ignored (does not require updating)
    15:58:36  [ F:\ ] Status = Successful
    15:58:36 1 device(s) successfully cloaked from SecuROM 7.xx: 
    15:58:36  [ D:\ ] Status = Ignored (does not require updating)
    15:58:36  [ F:\ ] Status = Successful
    15:58:36 * Cloaking procedure completed.
    Weird huh?

    Here's another, this time I Disabled the Physical Drive again (No reset yet).
    Code:
    16:01:1  Y.A.S.U v1.6.9040 started...!
    16:01:12 DAEMON Tools Lite v4.30.4.27
    16:01:12 Microsoft Windows XP v5.1 (Build 2600: SP 2)
    16:01:12 Locale: English (United States)
    16:01:12 Detected 1 optical device(s), 
               1 physical & 0 virtual device(s)
    	
    16:01:18 * Cloaking procedure started.
    16:01:18 0 device(s) successfully cloaked from SafeDisc 4.xx: 
    16:01:18  [ F:\ ] Status = Ignored (does not require updating)
    16:01:18 1 device(s) successfully cloaked from SecuROM 7.xx: 
    16:01:18  [ F:\ ] Status = Successful
    16:01:18 * Cloaking procedure completed.
    	
    16:01:25 * Cloaking procedure started.
    16:01:25 0 device(s) successfully cloaked from SafeDisc 4.xx: 
    16:01:25  [ F:\ ] Status = Ignored (does not require updating)
    16:01:25 0 device(s) successfully cloaked from SecuROM 7.xx:
    16:01:25  [ F:\ ] Status = Ignored (does not require updating)
    16:01:25 * Cloaking procedure completed.
    	
    16:01:27 * Uncloaking procedure started.
    16:01:27 0 device(s) successfully uncloaked from SafeDisc 4.xx:
    16:01:27  [ F:\ ] Status = Ignored (does not require updating)
    16:01:27 0 device(s) successfully uncloaked from SecuROM 7.xx:
    16:01:27  [ F:\ ] Status = Ignored (does not require updating)
    16:01:27 * Uncloaking procedure completed.
    	
    16:01:46 * Uncloaking procedure started.
    16:01:46 0 device(s) successfully uncloaked from SafeDisc 4.xx:
    16:01:46  [ F:\ ] Status = Ignored (does not require updating)
    16:01:46 0 device(s) successfully uncloaked from SecuROM 7.xx:
    16:01:46  [ F:\ ] Status = Ignored (does not require updating)
    16:01:46 * Uncloaking procedure completed.
    and here's after a restart w/ physical drive {D:\} disabled.
    I repeated the last steps and got a duplicate of the above log.

  4. #4
    New User Melchior's Avatar
    Join Date
    01.05.2009
    Posts
    11

    Frage Syk0? Has he had a chance to Read?

    Quote Originally Posted by evlncrn8 View Post
    Im sure syk0 will check this post and reply to it as soon as he's aware
    I don't suppose Syk0 has had a chance to check my Bug report yet?

  5. #5
    New User
    Join Date
    15.06.2009
    Posts
    2

    Default

    The same is happening to me with ARMA 2 mini-ISO.

    Very weird !

    I tried to re-instal DAEMON LITE, to upgrade to DAEMON PRO, but the same continues.

    Maybe it is an YASU bug ?

  6. #6
    New User Melchior's Avatar
    Join Date
    01.05.2009
    Posts
    11

    Rotes Gesicht

    Quote Originally Posted by chicao77 View Post
    The same is happening to me with ARMA 2 mini-ISO.

    Very weird !

    I tried to re-instal DAEMON LITE, to upgrade to DAEMON PRO, but the same continues.

    Maybe it is an YASU bug ?
    That's what I've been saying.
    Daemon Tools isn't the problem.

    I'm still waiting on a reply from syk0, YASU's Developer.

  7. #7
    New User Melchior's Avatar
    Join Date
    01.05.2009
    Posts
    11

    Default

    Seems My Topic needs a an old fashion Bump. Excuse me.

  8. #8
    New User
    Join Date
    19.08.2009
    Posts
    1

    Default

    Same issue... Cloaks one DVDR device yet the other one and also the virtual of DT keeps saying its not needed. :/ And i was SO into checking the new Wolfentein if worth to go buy tomorrowz.. Oh well ^^

  9. #9
    New User
    Join Date
    19.08.2009
    Posts
    1

    Default

    I found a solution i'm on windows 7 RTM x64, right click daemon on taskbar>virtual cd/dvd>Device 0(aka virtual drive Duh :P) > Set Device Parameters> change the auto generated name to a custom name. After this it will apply your settings then use yasu and voila it now cloaks the virtual drive and ignores whatever physical drives you have . Hope this helps all of you.

  10. #10
    New User Melchior's Avatar
    Join Date
    01.05.2009
    Posts
    11

    Frage

    Quote Originally Posted by virtuox View Post
    I found a solution i'm on windows 7 RTM x64, right click daemon on taskbar>virtual cd/dvd>Device 0(aka virtual drive Duh :P) > Set Device Parameters> change the auto generated name to a custom name. After this it will apply your settings then use yasu and voila it now cloaks the virtual drive and ignores whatever physical drives you have . Hope this helps all of you.
    Interesting... This might help as a temporary measure...

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •