PDA

View Full Version : Daemon.exe crashes after successfully mounting image in XP Tablet Edition



agrabren
24.08.2003, 03:22
I recently got a Motion Computing M1300 Centrino-based tablet, with Windows XP Tablet Edition installed, and installed a copy of Daemon Tools 3.33. I've been a long-time user, and this is a new problem for me. Any time I mount an image, the image mounts, but then daemon.exe causes an access violation (C0000005). Stack trace at end of message, and user.dmp file easily generatable...

Error caused by SetWindowPlacement making a call into address 54591518, which is not mapped to any loaded memory space, and the address is invalid.

0012ef48 77d67ad7 00337b40 0000001c 00000000 0x54591518
0012ef74 77d6ccd4 00170188 00030480 0000001c USER32!SetWindowPlacement+0x57
0012efdc 77d445bd 00000000 00170188 00030480 USER32!DefRawInputProc+0x284
0012f030 77d447d4 00647da8 0000001c 00000000 USER32!TranslateMessageEx+0x78d
0012f058 77f75da3 0012f068 00000018 00647da8 USER32!DefWindowProcA+0x209
0012f0b4 77d746fe 00050488 00010192 00000010 ntdll!KiUserCallbackDispatcher+0x13
0012f0dc 77d6644e 00400000 00414ef8 00010192 USER32!CheckRadioButton+0x132
0012f0fc 77d6e97e 00400000 00414ef8 00010192 USER32!DialogBoxIndirectParamAorW+0x35
0012f128 00402073 00400000 00000067 00010192 USER32!DialogBoxParamA+0x4a
00010192 00430000 006d006f 00700053 00630065 daemon+0x2073
0050004f 000000e1 05030500 00000000 279de000 0x430000

bickleigh
01.10.2003, 14:31
Operating System: Windows XP Tablet PC edition (Centrino)
Burning Software: Blindwrite
Anti-virus Software: Norton
DAEMON Tools Version: V3.33

Well there ya go! Just when I thought my new Tablet PC from Acer was the best thing since sliced bread, I load up Daemon tools and find exactly the same problem as the previous writer.

As I have used Daemon tools for a long time with out problems on my desktop PCs. I did not suspect Daemon Tools to be the problem. (This was not too difficult as I think Daemon Tools is a God amongst programs. 8) )

I thought at first it was the default CD burning software that was installed on the PC. But after deinstalling the burning software and finding the same problem I concluded that there must be something about the Tablet PC or OS. The above post seems to confirm that the probelm is with Windows XP Tablet OS and Daemon Tools interoperability.

I will not repeat the error details as they have been discribed above. But suffice to say, the error is exactly the same. Same code, same memory address, same every thing. The only difference being that the PC is different.
PC: Acer Travelmate C110 running Windows XP Tablet PC Edition.

As this problem was logged a little while ago by the previous writer, the question I have is: Is there anybody looking into it and what is the cuurent status.

If I get quick answer I might make another donation to this worthy cause :wink:

All the best to the Daemon Tools team.

Bickleigh

agrabren
01.10.2003, 16:37
If it would help the team, I'm a seasoned Windows kernel developer, and can do some/any debugging neccessary, if there are a lot of other issues.

Development
01.10.2003, 23:14
Could you please mail me to venom386@daemon-tools.cc
We'll try to investigate this problem.

bickleigh
02.10.2003, 13:06
Could you please mail me to venom386@daemon-tools.cc
We'll try to investigate this problem.

What Information do you need?

Bickleigh

Development
02.10.2003, 14:34
I need someone with debugger (eg. SoftIce) installed on this hardware.
Then i could give him special version so we could try to locate where it happens.

bickleigh
03.10.2003, 18:20
I need someone with debugger (eg. SoftIce) installed on this hardware.
Then i could give him special version so we could try to locate where it happens.


Well, as it happens, here's one I prepared earlier. :wink:

The primary use for my Acer Tablet PC is as a study tool, reading ebooks mainly; also I do a little programming from time to time when I am away from home and I have (on the very rare occasion) a little inspiration. To that end I have installed on the PC - MASM32, Radasm and I also use Ollydbg v1.09d for debugging.

Don't misunderstand me - I am not a main stream programmer so what ever you would like me to test, you will need to be explicit in your instructions.

I do have Softice v4.05 if you would prefer.

Let me know

Bickleigh

Development
03.10.2003, 18:26
Ok, mail me to venom386@daemon-tools.cc and we'll check it.

bickleigh
03.10.2003, 18:51
Jeeze VeNoM386, you must live breath and sleep with your PC :wink: , you are undoubtable, one of the fastest responders in a forum I have seen for a long time. Well done!

As an aside and for general information, I have download and installed the latest version (V3.41);
sadly the problem still exsist.

I know it was a long shot, but you never know, sometimes small instablities like this one can disappear across versions.

I will be emailing you shortly. (after me dinner! am starving!)

Bickleigh

Development
03.10.2003, 21:34
Ok, got your email and replied. We'll continue discussion there until solution will be found.

bickleigh
05.04.2004, 16:32
Just like to say thanks to VeNoM386 and all the development team.

I've just downloaded the latest version (v3.46) and I am happy to report that the issue I was having has now been fixed. Well done and thanks once again for superb, dedicated support of a great product.

Heres to your continued success.

Bickleigh