PDA

View Full Version : device setup error



zigc
25.12.2003, 16:02
Operating System: windows 98 secound edition
Burning Software: nero 5
Anti-virus Software: F-Secure
DAEMON Tools Version: i tried versions 3.33; 3.41; 3.43

hi,
i have the same problem!!
i allmost innstall the dt when this shit appears:
device setup error: code 25009 (0x61b1)......contact your support personnel!?
what can i do??
please help me?? :cry: :cry: [/b]

Development
26.12.2003, 07:10
25009 error is specific to 2000/XP only - im curious how you can get it 98SE...

zigc
28.12.2003, 10:19
sorry!! it's 25032!!!!
how can i solve this problem??
please help me?! :?: :cry:

yupsi
30.12.2003, 13:39
Operating System: Windows 98 SE
Burning Software: Paragon CD-ROM Emulator
Anti-virus Software: Kaspersky Anti-Virus
DAEMON Tools Version: 3.41, 3.43

In those versions during setup I had message about error 25032.
D-Tools 3.33 and some older versions worked fine. How can I solve this problem? :oops:

yupsi
06.01.2004, 17:01
the same thing in 3.44 :roll:

Development
06.01.2004, 17:36
When you get this - DON'T press ok, just got to device manager, what you see there? Is 'PnP BIOS Extension' present? What about virtual SCSI controller?

benallgor
16.01.2004, 01:54
Operating System: Win98se
Burning Software: none
Anti-virus Software: none
DAEMON Tools Version: 3.44

I have this same problem. The error message comes very near the end, after the installer has compiled a driver database.

I checked Device Manager when the error is displayed.
SCSI drivers are, d344prt.mpd, ios.vxd
PnP Bios Extension drivers are, d344bus.sys, VMM32.VXD (ntkern.vxd)

I have Daemon Tools running fine on my Win2k desktop, but I have this problem on my laptop. Can you suggest anything?

Ben

Development
16.01.2004, 03:57
You mean you get 25032 but SCSI controller in DeviceManager is working fine?!

benallgor
16.01.2004, 15:16
The SCSI dirver was present and the icon was on my desktop, but when I clicked on OK in the error messsage test box, the installer backed out and uninstalled everything.

I did get it to work last night, though. When I got the "25032" error message, I pressed CTL-ALT-DEL, and in the Task Manager, I ended the Install task. This terminated it with out uninstalling everything. The virtual drive is set up and working fine now.

Thanks,

Ben

yupsi
19.01.2004, 04:15
Before pressing 'ok' there are only Paragon Emulator Virtual SCSI Controller in device manager. PnP Bios Extension has yellow sign on it and says that it can't load the drivers.

Development
20.01.2004, 02:30
@yupsi: what is actual error code in devica manager?
You reproduce this every time with 3.44? We may try to figure our what's going on if you mail me to venom386@daemon-tools.cc

b4d_s3c70r
11.03.2004, 21:05
Operating System: WinXP
Burning Software: Nero 6.3, CloneCD (dunno but i deleted driver while trying to install this)
Anti-virus Software: non (shut down KAV. removed it from services)
DAEMON Tools Version: 3.44

Hiho,
i got reely pissed of today when i saw that my favorite emulator wont work on my WinXP. At first, while trying to install it i got 25001 error. I read some topics here and as some advised i tried to uninstall some files DT might left from prvious instllation (but error wouldnt show up from start if this was the prob). I deleted shit load of things from registry (things that had SCSI miniport written on them). I saw there was a lot of em so i quit after a while. Also deleted some driver that are no longer used from system32/drivers. After all this i got 25009 error :/ So i installed old version on WinXP. I even tried disableing Windows File Protection while installing. DT 3.44 worked on same computer on Win98.

last few lines of install log before i got error:

MSI (s) (F0:D8): Executing op: PackageCodePublish(PackageKey={3DF62DC4-F864-4FA4-86A9-81794ABDEA4B})
MSI (s) (F0:D8): Executing op: ProductPublish(PackageKey={3DF62DC4-F864-4FA4-86A9-81794ABDEA4B})
1: {83895843-3A51-4C93-9DF3-2BDB65C7E54A}
MSI (s) (F0:D8): Note: 1: 1402 2: UNKNOWN\Installer\Products\3485983815A339C4D93FB2B D567C5EA4 3: 2
MSI (s) (F0:D8): Note: 1: 1402 2: UNKNOWN\Installer\Products\3485983815A339C4D93FB2B D567C5EA4 3: 2
MSI (s) (F0:D8): Note: 1: 1402 2: UNKNOWN\Installer\Products\3485983815A339C4D93FB2B D567C5EA4 3: 2
MSI (s) (F0:D8): Note: 1: 1402 2: UNKNOWN\Installer\Products\3485983815A339C4D93FB2B D567C5EA4 3: 2
MSI (s) (F0:D8): Note: 1: 1402 2: UNKNOWN\Installer\Products\3485983815A339C4D93FB2B D567C5EA4 3: 2
MSI (s) (F0:D8): Note: 1: 1402 2: UNKNOWN\Installer\Products\3485983815A339C4D93FB2B D567C5EA4 3: 2
MSI (s) (F0:D8): Note: 1: 1402 2: UNKNOWN\Installer\Products\3485983815A339C4D93FB2B D567C5EA4 3: 2
MSI (s) (F0:D8): Executing op: UpgradeCodePublish(UpgradeCode={25C1F3B4-F317-41F4-AE1C-FBD533DE1253})
MSI (s) (F0:D8): Executing op: SourceListPublish(,,,,NumberOfDisks=1)
MSI (s) (F0:D8): Note: 1: 1402 2: UNKNOWN\Installer\Products\3485983815A339C4D93FB2B D567C5EA4\SourceList 3: 2
MSI (s) (F0:D8): Executing op: ProductPublishClient(,,)
MSI (s) (F0:D8): Executing op: SourceListRegisterLastUsed(SourceProduct={83895843-3A51-4C93-9DF3-2BDB65C7E54A},LastUsedSource=C:\WINDOWS\Downloaded Installations\DAEMON Tools 3.44\)
MSI (s) (F0:D8): Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (F0:D8): Setting cached product context: machine assigned for product: 3485983815A339C4D93FB2BD567C5EA4
MSI (s) (F0:D8): Specifed source is already in a list.
MSI (s) (F0:D8): User policy value 'SearchOrder' is 'nmu'
MSI (s) (F0:D8): Machine policy value 'DisableBrowse' is 0
MSI (s) (F0:D8): Machine policy value 'AllowLockdownBrowse' is 0
MSI (s) (F0:D8): Adding new sources is allowed.
MSI (s) (F0:D8): Set LastUsedSource to: C:\WINDOWS\Downloaded Installations\DAEMON Tools 3.44\.
MSI (s) (F0:D8): Set LastUsedType to: n.
MSI (s) (F0:D8): Set LastUsedIndex to: 1.
MSI (s) (F0:D8): Executing op: ActionStart(Name=DaemonDriverInstall,,)
Action 14:49:03: DaemonDriverInstall.
MSI (s) (F0:D8): Executing op: CustomActionSchedule(Action=DaemonDriverInstall,Ac tionType=3073,Source=BinaryData,Target=_DaemonDriv erInstall@4,CustomActionData=d344bus;d344prt)
MSI (s) (F0:D8): Creating MSIHANDLE (11) of type 790536 for thread 984
DEBUG: Error 2835: The control ErrorIcon was not found on dialog ErrorDialog
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2835. The arguments are: ErrorIcon, ErrorDialog,

Development
12.03.2004, 08:24
Before trying to install make sure there are no unknown devices in device manager and no driver left from previous version. Check '25002...'
thread in common solution section for details.
AFter reboot try again. If you still have prob them post full error message and send FULL log.