PDA

View Full Version : DAEMON Tools Extensions (DTE)



Blazkowicz
31.01.2009, 23:13
Here is a new 3rd party tool which allows you to play latest versions of SafeDisc and SecuROM.

DTE must be extracted to installation folder of DAEMON Tools Pro 4.30.0304.0047.

Disk-Tools.com - Published Software Download (http://disk-tools.com/download/dte)

pseudo555
01.02.2009, 11:38
I got dt pro advanced thank's to translator offer.

I only use IDE virtual device. In the nfo files given with dte, i read : "2.0.4.1: Add SecuROM support, sorry no SCSI support for now". So i think vIDE device is supported.

So why can't dte cloack my vIDE device ?

Blazkowicz
01.02.2009, 12:29
Please change drive's vendor and model to something else and try again.

Also you can't see anything on the picture due to its quality :(

pseudo555
01.02.2009, 12:41
Renaming the virtual device solved this problem.

But i have to wait fews secs : dte can't view my devices just after DTPro change, now it works perfectly (without a reboot, just clode st pro gui, close DTE, restart DTE, enjoy). ;)

mbf-4
02.02.2009, 15:03
I have installed dt pro 0304 trial and copied dte.exe to the installation folder, so when I start dte.exe nothing happens, how this app supposed to work?

Blazkowicz
02.02.2009, 21:16
A gui should show up then.

mbf-4
03.02.2009, 16:04
dte closes immediately after start, so I can't even see gui, I wonder why... os: xp sp3

Blazkowicz
03.02.2009, 18:14
Is it still shown in Task Manager?

mbf-4
04.02.2009, 11:29
I checked that, of course... task manager shows dte.exe after start for a 1-2 seconds, then dte closes, and nothing happens. No gui, no error messages, just quiet death. Maybe dt pro trial-version (or xp sp3) is not supported?

Blazkowicz
04.02.2009, 21:04
They are supported, author found a bug which could cause it.

mbf-4
04.02.2009, 22:30
Thanks for your replies, Blazkowicz. Could you inform in this thread if it will be fixed, ok?

Triokon
09.02.2009, 15:31
Hello :)

I have a problem. I wanna play GTA IV without the CD, but of course it detects Daemon Tools due to Securom.
So i get the error: "Konflikt mit Emulationssoftware entdeckt" ( means " emulation conflict detexted" ).
Then i tryed your little tool "DTE". But when i open a new drive, DTE shows me with this little red sign, that it is "unable to cloak this drive" on the side of "SecurOm".
And i want to cloak Securom, because GTAIV is protected of it.

Please help me :(

MfG Trio

PS: Sorry because of my bad english.... I hope it is understandable.

Blazkowicz
09.02.2009, 16:07
@Triokon
Only vIDE of DT Pro Advanced Build 304 is supported, no vSCSI.
When you want to cloak vIDE and it shows red cross, then change drive's parameters in DT Pro.

Triokon
09.02.2009, 16:19
@Triokon
Only vIDE of DT Pro Advanced Build 304 is supported, no vSCSI.
When you want to cloak vIDE and it shows red cross, then change drive's parameters in DT Pro.

Umpf, i have DT Pro Standard Build... should be the newest, it is the 20 day trial version.
There is an understanding problem for me.... What du you mean with "change drive`s parameters in DT PRO"? Where can i change this? Could you explain that a little bit? Would be great if you could give me the steps to do this....
Sorry about the newbishness.

MfG Triokon

PS: I even saw that you are "GERMAN TRANSLATOR".....Would it be possible to explain it to me in german.... It would make the hole thing easier for me.

Another question....You even talked about the Pro Advanced version. Is it possible for me toupgrade my Pro Standard version to the adavanced version?
That would maybe solve the problem, if i have understood you right.

MfG Trio

Blazkowicz
09.02.2009, 16:38
vIDE drive = virtual IDE drive

And only DT Pro Advanced has vIDE drives, therefore not possible for Standard one.

For upgrade, just select Help -> License -> Trial license and select Advanced. Now you should have a trial version (20 day) for Advanced one. Of course this only works if you haven't tried Advanced one before.

For changing drive's parameter:
DT Pro Agent -> Virtual CD/DVD-ROM -> select a virtual IDE drive -> Set parameter -> Enter something into Vendor, Model and Revision


German translation:

vIDE-Laufwerk = virtuelles IDE-Laufwerk

Und nur DT Pro Advanced besitzt vIDE-Laufwerke, daher mit der Standard nicht moeglich.

Zum Upgrade, klicken Sie einfach auf Hilfe -> Lizenz -> Testlizenz und waehlen Sie dann Advanced aus. Jetzt sollten Sie eine Testversion (20 Tage) der Advanced haben. Natuerlich funktioniert dieses nur, falls Sie nicht bereits vorher die Advanced getestet haben.

Um die Laufwerkseigentschaften zu aendern:
DT Pro Agent -> Virtuelle Laufwerke -> ein virtuelles IDE-Laufwerk auswaehlen -> Laufwerkeigenschaften festlegen -> Etwas anderes bei Hersteller, Modell und Firmware eingeben

pseudo555
09.02.2009, 20:25
Just for french people :
A quick start guide has been made here (http://www.belgium-gravure.net/BG_post_p_28158.html#28158)

by the way, if discprowler want to translate his program in another language, i ll be pleased to make the french translation ;)

Blazkowicz
09.02.2009, 20:33
English should be enough for that tool as you only have to click on one or two buttons.

Blazkowicz
09.02.2009, 23:13
Could you inform in this thread if it will be fixed, ok?

Check attachment.

mbf-4
10.02.2009, 11:00
Hmmmm, this version also don't work for me... wtf?

evlncrn8
14.02.2009, 14:54
i know that feeling :) .. personally im not going to use this even if it is fixed, its destructive, has no undo and polls the drives far far too many times (presumably to find new drives, but it could do that from windows messaging)... the gui is also unresponsive at times.. im really surprised its being promoted by dt in its current state.. for me, i'll use syk0's new tool, which (surprise surprise) isn't destructive (has undo feature) and is considerably smaller and reliable (just like most of the tools he's released)...

/me kicks DTE to the recycle bin

Reef
14.02.2009, 16:47
Syk0's new tool? Did I miss something?

evlncrn8
14.02.2009, 17:13
im sure he'll announce it soon, it was just 'born' today afaik

Blazkowicz
14.02.2009, 17:55
There is no need for an undo feature as it will be undone by Windows on next start.
Also i guess sYk0's new tool is destructive like YASU is atm.
And i can bet new tool will be blacklisted very soon (especially since it has mostly no protection) and also its changes.

evlncrn8
14.02.2009, 18:02
so the changes to the hardwareid portion in the registry are rebuilt by windows on boot? .. dont think so blazi.. it permanently changed them on my machine

by destructive i meant it changes registry data, without backing it up... it definately did this on my machine.. i had to fix it manually, and vmprotect hardly protects dte against blacklisting.. all tools will get blacklisted eventually, thats inevitable

Blazkowicz
14.02.2009, 18:05
Well, i tested on several OSes (multiple Vista and a few XP) and they get rebuilt everytime on windows restart. Also these changes doesn't harm like YASU's one sometimes.

Sure about blacklisting, but DTE only has to run once in a windows session (except a new drive gets added) and YASU have to stay open and there a blacklist can be easily implemented. Except sYk0 changed it on his new tool.

Anyway let's just wait until sYk0's new tool is released and then we can discuss a compare between both tools again.

Blazkowicz
14.02.2009, 21:59
@mbf-4
You have enabled DEP or not?

mbf-4
16.02.2009, 19:17
dep current status:
enabled only for windows services
boot.ini config:
/NoExecute=OptIn

mbf-4
16.02.2009, 19:28
Just tried dte version 1.0.0.1 (modified:14.12.08) and it works...

Blazkowicz
16.02.2009, 20:40
It doesn't support 304 and SecuROM.

I guess you have Comodo Firewall installed, if not, then please tell us your security software.

mbf-4
16.02.2009, 23:49
yes, I have comodo firewall 3.5.57173 installed, but I turn everything off before installing/running dt and dte. do you think I should uninstall CF completely to make dte work?

Blazkowicz
17.02.2009, 00:10
Please try attached DTE, it works with Comodo for me.

Added command line interface, also some bugs fixed.

mbf-4
17.02.2009, 11:28
Yes, this version works fine, thanks.

Akumajou
20.02.2009, 10:11
Is DTE on Disk-Tools.com going to be updated?

Blazkowicz
20.02.2009, 19:28
Will alert tech guy, so it will be updated.

clumba
21.02.2009, 17:27
Please try attached DTE, it works with Comodo for me.

Added command line interface, also some bugs fixed.

I use DT Pro 4.30.03, but DTE not work:

http://s55.radikal.ru/i150/0902/cb/4af22547d333.png

Blazkowicz
21.02.2009, 17:29
You need Pro build 304.
Also you have to copy DTE.exe to your installed activated DT Pro folder.
You also have to activate at least one virtual drive.

mbf-4
28.02.2009, 09:42
I tried dte+dt.0304 (trial) with GTA4 v1.02 but no luck, it says that "emulation software detected", hmmm:(

Blazkowicz
28.02.2009, 09:46
Do you see any SecuROM link? If yes, what does it say when you click on it?

DTE says cloaked on vIDE?

mbf-4
28.02.2009, 10:13
I'm going to reinstall gta4 on fresh win xp3 today, will see if the problem persists...

mbf-4
01.03.2009, 08:39
Here the error message and link you asked for:
The required security module not activated.
This program can not be executed (5023).
SecuROM (http://www.securom.com/message.asp?m=module&c=5023+&l=en)

p.s: yasu is not running at background, only dte. alcohol (with acid) is not installed at all...

mbf-4
01.03.2009, 08:56
p.s: original gta4 image worked fine with dt pro.0303 + vIDE + latest yasu, but when I installed gta v1.02 patch, Securom started bothering me... :)

Blazkowicz
01.03.2009, 09:37
Somehow ACID or YASU must run as DTE doesn't get detected by SecuROM yet.
Also DTE doesn't have to be open.

mastek
02.03.2009, 03:58
Hello. I created crysis image (ISO file) with DT Pro Advanced 4.30.304 new securom profile.

I used DTE latest version. I cloaked VIDE drive.

But I could not play Crysis (v1.0) Securom is active.

How can play without DVD ?

Blazkowicz
02.03.2009, 07:35
You have to create mdf/mds image and not iso image.

mastek
03.03.2009, 12:08
You have to create mdf/mds image and not iso image.


it works. Thank you very much for your help.

veilchen80
07.03.2009, 22:13
dte detects no drives :(

http://i44.tinypic.com/53pd15.jpg

varxx
25.03.2009, 02:20
i have the newest one on the site, and my DTE crashes immediately after I run it.

All I get is "Program has stopped Working" and then it closes

Blazkowicz
25.03.2009, 07:34
Which OS (i guess Vista)?
Which security software?
Is UltraISO installed with a virtual drive (ISO)?
And with latest version you meant 2.2.10.0?

.AnG3L.
25.03.2009, 07:57
DAEMON TOOLS Extensions has stopped working :|

norsefire
25.03.2009, 09:58
Im having the same issue, it just closes on me, im using the newest DT evaluation software, and ive tried multiple DTE versions, all with the same issue

calanor
25.03.2009, 10:08
I'm actually having the same problem,
running DT Pro 4.30.0304 and the new DTE, as soon as i start DTE up it stops working.

using vista myself

greetings,

rafu997
25.03.2009, 12:07
I have Win vista, DT Pro Advanced 4.30.0304, DTE 2.2.10.0 and i'm trying to run Wanted: Weapons Of Fate. I have IDE virtual drive and cloaked SacuRom and SafeDisc and i'm still getting this error:
http://img128.imageshack.us/img128/9223/przechwytywanie.th.jpg (http://img128.imageshack.us/my.php?image=przechwytywanie.jpg)

Blazkowicz
25.03.2009, 13:38
http://img128.imageshack.us/img128/9223/przechwytywanie.th.jpg (http://img128.imageshack.us/my.php?image=przechwytywanie.jpg)

Well, that error means your image is bad and DTE did its job. You have to recreate it from your original disk with New SecuROM profile and various DPM read speeds.

Blazkowicz
25.03.2009, 13:39
@calanor, norsefire and .AnG3L.
Check post #48 and answer the questions or we can't help you.

norsefire
25.03.2009, 14:16
@calanor, norsefire and .AnG3L.
Check post #48 and answer the questions or we can't help you.


Which OS (i guess Vista)? YES
Which security software? Bitdefender ;)
Is UltraISO installed with a virtual drive (ISO)? Using DT 4.30.0304
And with latest version you meant 2.2.10.0? YES! and ive tried three other versions as well.

The prog starts, then error "DTE has stopped working"

Yes i have tried admin rights setting, winxp compability mode.

And I am also trying to run wanted =p

Please help

OmukasX
25.03.2009, 14:27
http://img230.imageshack.us/my.php?image=nerodo.jpg

Windows Xp SP3, Newest DT Pro Advance and newest version of DTE. Anyone know how to solve this problem ? There is no drives in DTE.

guiver
25.03.2009, 14:30
Problem: When i try and load DTE.exe i get the following message "Daemon tools extensions has stopped working"

Which OS? Vista SP1
Which security software? None, using secure server
DT version? 4.30.0304
DET verrion? 2.2.10.0

anyidea?

Blazkowicz
25.03.2009, 14:46
@OmukasX
It is related to UltraISO virtual ISO drive

@Rest
Will try to reproduce them, especially with BitDefender.

varxx
25.03.2009, 16:54
Incase it was just my Vista OS, I tried running it in windows 7, and unlike Windows Vista, i dont even get an error (btw yes I know... Windows 7 = Beta, but my experiences with 7 have been more stable than vista half the time)

I'm wondering if its possibly an incompatibility with one of my hard drives... (First I thought DVD drive, but I unplugged it completely and it still crashed)

My harddrives are:
Seagate Barracuda 7200.10 SATA 3.0Gb/s 160-GB Hard Drive
SAMSUNG SP2504C Spinpoint P120 SATA



Also, i wanted to see if maybe it was just the GUI crashing, so I used the command line... Same thing happened... it crashes. It didnt cloak them either

varxx
25.03.2009, 16:58
OMG!!! Never mind! I got it working, I didnt even realize it but apparently PowerISO was installed >.<

im so stupid

Blazkowicz
25.03.2009, 17:52
Thanks for the info - will take a look into PowerISO.

EDIT: It seems PowerISO is using same/similar driver as UltraISO and therefore that bug. Will be fixed in next version.

norsefire
25.03.2009, 18:45
Ok, i tried to uninstall PowerIso, didnt work!

Damn

Blazkowicz
25.03.2009, 18:48
norsefire, have you other virtual drive software installed? Have you disabled virtual drive of PowerISO?
Anyway next version will fix it.

norsefire
25.03.2009, 19:01
I finally got DTE working perfectly, although i still cannot get Wanted to work! I have a LEGAL Backup of the game since i dont want to bother with switching DVDs when i change games, i get securom error 7000 even when cloaked with IDE drive =(

Blazkowicz
25.03.2009, 19:06
Have you tried the way from SecuROM website (http://www.securom.com/message.asp?m=module&c=7000)?
Also please scan game exe with ProtectionID for exact SecuROM version.
But since rafu997 get insert original message, it seems DTE is not blacklisted yet.
Anyway i will check that game and SecuROM, just will take a while until the disc arrives.

norsefire
25.03.2009, 19:15
The game runs when i use the disc, but i hate using discs since i have a collection of approx 300 pc games, and maybe 30 games i play regularly.


Update: Its SecuROM Detected - Version 07.39.0005

RazzoCotto
25.03.2009, 20:07
@varxx

which version of daemon tools pro is windows 7 compatible?

Blazkowicz
25.03.2009, 21:04
None so far, you have to wait for SPTD update.

guiver
26.03.2009, 00:04
slowly getting there,
DTE was not working due to the fact i had a MagicISO drive still active but now its saying "No cloaking required"

http://i221.photobucket.com/albums/dd7/Tom_Guiver/DTE.jpg

anyideas?

tx3000
26.03.2009, 07:37
It doesn't do anything.

I double click the DTE.exe and all I get is this:


It's a non interactive screen. There is no way to right or left click on it to select or set anything with this.

http://img.photobucket.com/albums/v285/tx3000/DTETool.jpg

Blazkowicz
26.03.2009, 07:40
It is not useless, just disable other virtual drives, e. g. from UltraISO/PowerISO/MagicISO and then it is working.

You should also search before posting.

Blazkowicz
26.03.2009, 07:42
slowly getting there,
DTE was not working due to the fact i had a MagicISO drive still active but now its saying "No cloaking required"

http://i221.photobucket.com/albums/dd7/Tom_Guiver/DTE.jpg

anyideas?

Maybe it is already cloaked and therefore DTE states that.

evlncrn8
27.03.2009, 08:41
new ver doesnt work here, screen appears, does nothing, then disappears, i do have ultraiso installed...

i suspect the problem with ultraiso/poweriso virtual drives is that they don't return anything on an ioctl to get the vendor, revision, product etc... unless the size of the buffer is EXACTLY what is needed (0x1c if i remember right).. anything more, anything less, you get nothing...

also new version crashes in win2k sp4



004060B6 66:8B00 MOV AX,WORD PTR DS:[EAX]
004060B9 68 840921A3 PUSH A3210984
004060BE ^E9 EFB8FFFF JMP DTE.004019B2

EAX 04A67F65
ECX 000000B4
EDX 00401A37 DTE.00401A37
EBX FFB0BE91
ESP 0012FE28
EBP 0012FED4
ESI 0048D399 DTE.0048D399
EDI 0012FE30
EIP 004060B6 DTE.004060B6


access violation....

RazzoCotto
27.03.2009, 09:08
Hi all,

Does anyone know how to uncloak a virtual drive cloaked with DTE?

Thanks

SolidSnake4
27.03.2009, 12:44
hy guys i use dte.exe ver 2.2.10 but doesn't work. I have created one virtual ide device, then i click on dte, but don't show me the ide device why ?

Blazkowicz
27.03.2009, 14:24
@evlncrn8
Will check on Windows 2000. Other error is regarding Magic/Power/UltraISO's virtual drive

@SolidSnake4
Which DT Pro version are you running and can you post a screenshot?

Wekslie
27.03.2009, 14:51
hi. what do i have to change in the parameters? it keeps saying: unable to cloak this drive

Blazkowicz
27.03.2009, 16:10
Virtual SCSI drives can't be cloaked for SecuROM.

EDIT: Windows 2000 issue reproduced.

Blazkowicz
27.03.2009, 17:19
Today my copy of Wanted arrived and everything works as it should, therefore no DTE blacklist.

frognatic
28.03.2009, 11:37
Hi! I have a little problem. I can't run DTE. DTE crashed when i I try open. I use DT 4.30.0304.0047 and new ver DTE. My system is Vista 32bit
Sry for my english and thx for help.

Blazkowicz
28.03.2009, 12:03
Disable virtual drives except the ones from DT Pro.

frognatic
28.03.2009, 12:43
Disable virtual drives except the ones from DT Pro.

Hm I have one more drive, but i don't know how I can disable this. I have only DT, no more software with virtual drive. I can't disable :<

Blazkowicz
28.03.2009, 12:45
So you don't have Ultra/Magic/PowerISO installed?

frognatic
28.03.2009, 13:09
So you don't have Ultra/Magic/PowerISO installed?

Oh I had Ultra ISo, I disabled Ultra ISo and ... It's work, very thanks for help :)

rakyhhh
28.03.2009, 18:35
When i launch DTE.exe a message appears "File corrupted! This program has been manipulated and maybe it's infected by a Virus or cracked ..." someone can help me?

Blazkowicz
28.03.2009, 19:22
As i already told you, redownload DTE.

rakyhhh
28.03.2009, 20:09
i did it many times ... didn't work :/

Blazkowicz
28.03.2009, 20:41
Please check it's hash:
It should be:
CRC-32 : 041E44E4
MD5 : 751EA2B7394FB6B613C9ECD0FED0C704

rakyhhh
28.03.2009, 23:13
How can i check it?

Blazkowicz
29.03.2009, 00:04
Download HashCalc from Disc-Tools.com - Published Software Download (http://disc-tools.com/download/daemon+isomaker+astroburn+dtpro+sptd+hashcalc)

rakyhhh
29.03.2009, 00:32
mine are:
836e42a2
4ebb3dae128424c8c664430b80aa8f7e

Blazkowicz
29.03.2009, 00:50
Since hash differs, that error comes up. Did you download it from here (attachment)? If yes, archive is fine, try with another browser and no download manager to redownload it. And if you have done that and still not working, check your ram for errors.

Forsakenfire
29.03.2009, 03:42
http://i16.photobucket.com/albums/b37/njday/th_DTE.jpg (http://s16.photobucket.com/albums/b37/njday/?action=view&current=DTE.jpg)

I can only get this far, won't let me cloak it.

rakyhhh
29.03.2009, 08:54
i downloaded it with IExplorer and it works fine thanks.

rakyhhh
29.03.2009, 09:02
A new problem appears when i launch it from IExplorer "Open" after download it works but when i launch it from DTPro folder it doesn't work.

SLAYER991
29.03.2009, 11:08
I'm really frustrated at this point. I've tried just about everything I've read here to no avail.

Windows XP SP3
DT 4.30.0304 Pro Advanced
DTE-2.2.10.0 (Hash checked good)
Norton Endpoint 11 - Disabled for testing

DTE Crashes immediately...no other ISO program running. Good MDS image created from disk.

Also playing Wanted.

RazzoCotto
29.03.2009, 11:21
Hi,

I know that DT Lite can't add a new vIDE drive but I want to ask you all if there is a way to do this by modifing the registry

Thanks

Blazkowicz
29.03.2009, 12:18
http://i16.photobucket.com/albums/b37/njday/th_DTE.jpg (http://s16.photobucket.com/albums/b37/njday/?action=view&current=DTE.jpg)

I can only get this far, won't let me cloak it.

You have to extract it to install folder of DT Pro as DTE is stating.

@RazzoCotto
It is not possible to do that through registry.

@SLAYER991
They must not be runned (other iso programmes), they only have to be installed with a virtual drive.

@rakyhhh
And which error you get in DT Pro folder?

rakyhhh
29.03.2009, 13:57
that:
ImageShack - Image Hosting :: 64719881.png (http://img21.imageshack.us/my.php?image=64719881.png)
and DTE doesn't work with IExplorer again ...

maxxwel
29.03.2009, 14:30
Hi everyone !

Thanks for this wonderful thread. But I still have a problem with my DTE.

I paste it on my DT pro installation folder (C:\Program Files\DAEMON Tools Pro) but it still have the "Make sure you copy DTE to installation folder" red message.
Also, my drive is an IDE, but I can't cloak it : "SecuROM cloack status : Unable to cloack this drive".

Can someone have an idea of my problem?

Thanks !

Screen : http://img528.imageshack.us/img528/1035/dte.jpg

Blazkowicz
29.03.2009, 15:01
@maxxwel

You do have DT Pro 4.30.0304 installed?

@rakyhhh
You already checked your hdd and/or ram for errors?

rakyhhh
29.03.2009, 15:04
how can i check it?

Blazkowicz
29.03.2009, 15:13
There are tools like MemTest or diagnostic tools for hard drives (don't know their name as there are different for every vendor). You can also run "chkdsk /f drive:"

rakyhhh
29.03.2009, 15:30
I've done but the problem persists ...

Blazkowicz
29.03.2009, 15:33
A memtest has to be run over several hours.

rakyhhh
29.03.2009, 16:49
i've retry it but the problem persist ...

SLAYER991
29.03.2009, 22:33
@SLAYER991
They must not be runned (other iso programmes), they only have to be installed with a virtual drive.


I don't have any other ISO programs installed or running.

Blazkowicz
29.03.2009, 22:56
Will test with Norton Endpoint 11 now, stay tuned.

matzel82
30.03.2009, 17:53
I have my old version from DaemonTools updated to the latest version 4.xxx.
Before i had the Safedisc-Emulation activated.

And now, at the window from DaemonTools is a small icon "Safedisc". I cant get click it.

When i use now the DTE (latest version) it isnt possible to use it.

Is there an solution ?

I from Germany, sorry for my English.

Blazkowicz
30.03.2009, 19:14
You can disable emulations in Tools -> Preferences -> Advanced.

Which error is DTE showing or how do you see it isn't possible to use it?


German:
Emulationen lassen sich unter Werkzeuge -> Einstellungen -> Erweitert aendern

Welchen Fehler erhaelst du von DTE oder wie siehst du, dass es nicht verwendbar ist?

Bitte in Englisch antworten.

matzel82
30.03.2009, 19:45
DTE dont show a Error. The Imagefile from my own Original-Cd dont start. I have found the menu, thanks.

Is DTE compatible with the advanced settings or may be there are conflicts ?

Blazkowicz
30.03.2009, 19:48
So GUI is starting up and you can cloak?

DTE is normally compatible, haven't checked myself.
And btw which game?

German:
Oberflaeche von DTE startet und du kannst cloaken?
DTE ist normalerweise kompatibel, hab es aber selber nicht getestet.
Ausserdem welches Spiel?

matzel82
30.03.2009, 19:58
I have it tested now. The image started.

Safedisc in DTpro is deactivated an cloaking activated.

I asked, is the advanced safedisc setting in DTpro compatible with the cloaking from DTE ?

Isnt a game, is an automotive-programm. Than i dont put the CD in Computer. I use an image.

Blazkowicz
30.03.2009, 20:00
Also starting when SafeDisc emulation is active?
Anyway emulation options should be only active when running burned media.

matzel82
30.03.2009, 20:22
Also starting when SafeDisc emulation is active?


I think, no. Its now Vista. Tomorrow i must test it on WinXP.

Blazkowicz
30.03.2009, 21:27
@SLAYER991
That norton product is not the cause, just installed in vmware.

SLAYER991
02.04.2009, 11:07
@SLAYER991
That norton product is not the cause, just installed in vmware.

I didn't think it was since I disabled it while running. No errors in the event logs. Any other ideas?

SLAYER991
05.04.2009, 07:33
@SLAYER991
That norton product is not the cause, just installed in vmware.

Still isn't loading at all. Is there a debug mode?


@SLAYER991
That norton product is not the cause, just installed in vmware.

Nevermind...it's working with the lastest version of Yasu.

Blazkowicz
05.04.2009, 11:54
@SLAYER991
How many optical drives do you have installed and how many of them are virtual drives? Try to set only one from DT Pro.

LaoziSailor
07.04.2009, 16:20
You can disable emulations in Tools -> Preferences -> Advanced.

Which error is DTE showing or how do you see it isn't possible to use it?


German:
Emulationen lassen sich unter Werkzeuge -> Einstellungen -> Erweitert aendern

Welchen Fehler erhaelst du von DTE oder wie siehst du, dass es nicht verwendbar ist?

Bitte in Englisch antworten.
This was my problem exactly after I disabled all virtual drives.
Still had SecuROM and Hide CD/R enabled, after I unchecked, rebooted and DTE recognizes my vIDE and "Wanted" runs like charm, ...if I only knew how to shoot it would be better :rolleyes:
I bought the game for my grandson, he doesn't like real life simulators ;)

Re-reading the thread is good, tis like one of the old games where you find treasures along the way.

Thanks to the development team. :)

artozas
09.04.2009, 01:21
Can u help me? my DTE doesn't work.. I did everything right, but DTE doesn't work anyway..


http://img11.imageshack.us/my.php?image=53pd15.jpg

Blazkowicz
09.04.2009, 15:02
@artozas
If you would like to provide more information (check this thread for information) and what is exactly not working?

stelistu
11.04.2009, 10:25
Can I find somewhere an older version as this one doesn't support win2k? Thanks.

Blazkowicz
11.04.2009, 10:53
If current one isn't working, then older version are also not working.

mazzaman
15.04.2009, 17:22
Hi i am having a problem with this, i am trying to run Fallout 3 but i keep getting problems with the SecuROM.

The image here is my best effort to try and help as i dnt rly know alot about images and mounting etc...

I will be happy to provide more information on request as i want to get past this problem!


http://i236.photobucket.com/albums/ff168/mazza-man/fallout3daemon.jpg

Note: OS is Vista 32 bit Home.
Ive restarted, the image file was done with a SecuROm profile at max speed i believe. The DTE is in the same program files location as Daemon Tools.

Many thanks

WooKisH
15.04.2009, 18:04
hello i have a problem with the extension tool
Anyway I downloaded exact same version you said and the DTE you posted in 1st thread.Than i created IDE drive and changed parameters the problem is the virtual disk is not showing in DTE!

any suggestions? :confused:

http://www.shrani.si/f/1R/bk/3F1BlDAI/omg.jpg

http://www.shrani.si/f/1R/bk/3F1BlDAI/omg.jpg

Blazkowicz
15.04.2009, 18:26
Hi i am having a problem with this, i am trying to run Fallout 3 but i keep getting problems with the SecuROM.


Stop using outdated DT Pro version, install latest version and then it is working.

@WooKisH
Disable other virtual drives, especially from Ultra/Power/MagicISO.
Also how many drives you have (with virtual drives)?

orsa99
19.04.2009, 18:49
Hello, sorry for my bad english.

I have daemon tools advanced version shareware 4.30.0305.0077.
I have the quadcore with 4gb with windows vista with SP1 and internet explorer 8.

I have installed the daemon tools extension (dte.exe file) v.2.2.10.0 in the root directory of daemon tools.

When I click on the dte.exe files, to appear a screen, but after few seconds this screen crashed (DT not crashed).
What is the problem?

Thank you for the next answer!

Giulio

Blazkowicz
19.04.2009, 18:52
@orsa99
DTE is not a tool from DT, therefore i moved your post here.

The crash can be related to either a virtual drive by Ultra/Magic/PowerISO or too much virtual/physical drives (more than 13).
Therefore deactivate virtual drive by mentioned programes or lower virtual/physical drives amount in DT Pro.

sYk0
19.04.2009, 22:08
The crash can be related to either a virtual drive by Ultra/Magic/PowerISO or too much virtual/physical drives (more than 13).
Therefore deactivate virtual drive by mentioned programes or lower virtual/physical drives amount in DT Pro.

Or just use Y.A.S.U (http://forum.daemon-tools.cc/f40/yasu-1-6-9040-released-23591/#post113051)

sYk0
20.04.2009, 08:03
The crash can be related to either a virtual drive by Ultra/Magic/PowerISO or too much virtual/physical drives (more than 13).
Therefore deactivate virtual drive by mentioned programes or lower virtual/physical drives amount in DT Pro.

Or you could just use Y.A.S.U 1.6.9040 (http://forum.daemon-tools.cc/f40/yasu-1-6-9040-released-23591/#post113051)

orsa99
20.04.2009, 09:57
@orsa99
DTE is not a tool from DT, therefore i moved your post here.

The crash can be related to either a virtual drive by Ultra/Magic/PowerISO or too much virtual/physical drives (more than 13).
Therefore deactivate virtual drive by mentioned programes or lower virtual/physical drives amount in DT Pro.

Blazkowicz, i have solved! I have disinstalled Ultraiso and it's all ok!

I have one more question. The advanced shareware version has all the functions of the commercial advanced version?

thanks, Giulio.

Blazkowicz
20.04.2009, 13:47
All functions yes, but you only can use it for 20 days.

orsa99
20.04.2009, 21:21
All functions yes, but you only can use it for 20 days.



Ok, thanks for all!


Giulio

robndahoodrich
21.05.2009, 06:18
Window 7 7100 64x ulti.
No mem errors or HD errors.

No other drive emulation software.

I only have one Daemon tools drive open.

When I run DTE (the newest version) nothing happens.

It comes up in task manager for about 2 seconds then disappers.

I've read through the thread and have done everything that was said in this thread, still no luck even getting the GUI to come up.

Blazkowicz
21.05.2009, 08:35
DTE is not Win 7 compatible yet.

maja9
21.05.2009, 10:53
yo
Can someone help me
I can't make a IDE drive in daemeon pro there's only SCSI activated.
I got win xp 64 bit edition, and I think thats the problem but maybe I'm wrong,
Looking forword 4 a good asnswer:rolleyes:

Blazkowicz
21.05.2009, 15:19
You should read program description before posting next time.
vIDE is not supported in XP x64.

mckumtdl"
21.05.2009, 15:36
ok thanks all

bullet21tt
31.05.2009, 12:50
sombody please give me a working DTE . its closing when i run it

Blazkowicz
31.05.2009, 13:33
@bullet21tt
We already "gave" you a working DTE, just other software or yours are interferring.

newtekie1
16.08.2009, 16:30
Is there any plans to make DTE compatible with Windows 7? If so, is there an ETA?

Blazkowicz
16.08.2009, 16:33
I heard from author he is already working on Win 7 and as usual he can't tell any ETA.

newtekie1
17.08.2009, 05:24
Glad to hear, thanks. Hopefully it comes soon.

mixalis987
05.11.2009, 23:29
helo i got an error when trying to cloak my mdf well i open dte and then says
safedisc:this device can be cloaked
securom:cloaking not allowed
can u tell me wich emulations should i have open?
i tried some conbinations of emulation on/off and it didnt work
i use vista+latest dt pr0 advanced +latest dte
and the game im trying to cloak is star wars jedi force unleashed

Blazkowicz
06.11.2009, 07:36
You don't need emulation options.
Also you need to cloak SecuROM for vIDE.
Also which DTE version are you running?

mixalis987
06.11.2009, 23:11
You don't need emulation options.
Also you need to cloak SecuROM for vIDE.
Also which DTE version are you running?

im using dte 3.0.15.0 should i use yasu to cloak securom?
because when i try to cloak it it says cloacking not allowed in securom section has one red circle(in dte)im wondering what im doing wrong

Blazkowicz
07.11.2009, 09:06
Also i told you you need to cloak vIDE, not vSCSI.

mixalis987
07.11.2009, 22:04
Also i told you you need to cloak vIDE, not vSCSI.

ok i tried to cloak vIDE but it says emulation detected
could u please link me the version u said that works with dte cuz i cant find it all over the net has newer versions

Blazkowicz
24.01.2010, 22:37
3.1.19.0:
USB driver code rewritten and updated
USB driver signed now
Windows 7 USB driver support added
USB driver state remembered
vUSB drive properties added

Disk-Tools.com - Published Software Download (http://disk-tools.com/download/dte)

Note: possible BSODs when following things are happening: source drive is deleting, SCSI adapter stopping or USB uses non-MS drivers

If you get any BSOD (Blue Screen of Death), please upload latest minidump available from c:\windows\minidump folder (c: could be also another drive letter, depends on Windows install drive).

If you get any other error than a BSOD, describe your steps precisely.

tvf_tez_e
14.02.2010, 11:26
Hi, I'm using DAEMON Tools Pro Advanced 4.35.0307 and Daemon Tools Extensions 3.1.19.0 together. Here, everything what i did, one and one:

First, I added an Virtual IDE Driver:
http://img689.imageshack.us/img689/7162/adsz1z.jpg

I mounted perfect quality DPM included FIFA 10 image:
http://img28.imageshack.us/img28/7662/adsz2x.jpg

I launched DAEMON Tools Extensions and pressed "Load Driver":
http://img27.imageshack.us/img27/5678/adsz3mu.jpg

Finally, I pushed "Play" on FIFA 10's autorun. And usual reason:
http://img197.imageshack.us/img197/1018/adsz4pt.jpg

What's wrong again? What do you suggest me? Thanks...

Blazkowicz
14.02.2010, 11:47
You have to add a virtual USB drive first in DTE (try different USB hubs).

Terramex
14.02.2010, 13:36
@tvf_tez_e
http://space.wismar-wacken.com/thomas/Files/DTE.wmv

After you've successfully created an vUSB device mount you're image to the vIDE as usual.

tvf_tez_e
14.02.2010, 14:40
Thank you for that vid, that was so helpful. I did same things but nothing changed. Please control things that i've done from this pic (http://img38.imageshack.us/img38/7751/unnamedz.jpg)...

Blazkowicz
14.02.2010, 14:44
If you think about it, you may get what is wrong there. vUSB drive is successfully created.
Hint: Drive Letter

veilchen80
18.02.2010, 13:38
not working with secu 7.41 (drakensang am fluss der zeit)

Blazkowicz
18.02.2010, 14:23
You actually used a vUSB drive and the vUSB drive letter is lower than vIDE's drive?
If yes, you may send me a mini image and necessary files to start disc check.

You also may tell us the exact SR version.

EDIT: Scanning -> Z:\Data\! base\drakensang.exe
File Type : 32-Bit Exe (Subsystem : Win GUI / 2), Size : 24787456 (017A3A00h) Byte(s)
[File Heuristics] -> Flag : 00000000000000000001000000000001 (0x00001001)
[!] SecuROM Detected - Version 07.41.0004
[!] Possible CD/DVD-Key or Serial Check -> Invalid serial
[CompilerDetect] -> Visual C/C++
- Scan Took : 3.0 Second(s)

EDIT2: Working fine with vUSB drive.
They added a better anti mini image support.
Error 4003 - means mini image detected.
When DPM is bad you get error 1000.

Terramex
19.02.2010, 18:09
They added a better anti mini image support.
Yeah, innovation as usual by Sony :rolleyes:
Still 10 ISO checks in total, but instead of checking one sector per day it's just a different interval now - for more info just send a PM. IIRC it was first used in Puzzle Quest: Galactrix.

meditek
21.02.2010, 10:30
Just a note to Blazkowicz to say that DTE worked first time once I had understood the USB drive from the excellent video.

I am using :-

Vista Ultimate x64 SP1
DTE v3.1.19.0
DT Pro 4.35.0308.0131
SecuROM Version 07.41.0004

For those who may be using it for first time, may I suggest the following sequence :-

1. For reliability firstly remove any virtual drives you may have on your system.

2. Mount a virtual IDE drive using Daemon Tools pro Agent after making sure that there are no ticks in Tools/Preferences/Advanced. Change the drive letter to one more than the last e.g. C,D,E > C,D,F

3. Make sure that DTE is in your DT pro folder and run it (I run as administrator)

4. Right click on the Vdrive and enable SafeDisk and SecuROM

5. Click Load Driver (USB driver)

6. Choose a port under Standard ENHANCED PCI > USB and Right click

7. Choose the same drive as the Vide drive you set up with DT Pro. The drive letter should appear as E in the example above.

8. mount your .mds image using DT Pro on drive F

Lastly, many thanks to Blazkowicz for an excellent add-on.

meditek
21.02.2010, 13:14
Couldn't find an Edit facility.

Important :-

1. Before a reboot Unmount your image or, if it has a habit of remounting, disable your virtual drive.

2. after reboot or startup follow the exact procedure in my last post.

You can get in a mess with freeze ups etc if you start DTE with the image mounted - well at least I did. Image must only be mounted after USB drive is up.

Unfortunately the Command Line facility does not include loading the USB driver.

Reef
21.02.2010, 20:45
Seriously, this is way too much of a hassle only to play a game. It has come to the point that it is actually a lot easier to just insert the original disc and play the game.

My days of buying retail games are over. Most games are also released on Steam nowadays, which is a lot easier than messing around with some anti-blacklisting tool and hoping it won't BSOD.

I know games on Steam are usually quite expensive, but this price also includes keeping my games up-to-date automatically ;)

meditek
21.02.2010, 21:31
Seriously, this is way too much of a hassle only to play a game. It has come to the point that it is actually a lot easier to just insert the original disc and play the game.

Couldn't agree more but it's only needed for a very short time before a gamefix comes out.

Blazkowicz
21.02.2010, 21:33
Doing 4 clicks is not complicated.

Reef
22.02.2010, 19:57
I challenge DT Soft to put that DTE 'manual' on disc-soft.com, so people can see what they will need to do to be able to run their games with DT Pro. Since it's 'not complicated', it should be no problem :D

shaithis
02.03.2010, 22:18
Are there any versions other then the one listed in the OP that work with both Win7 x64 and DTE?

I have recently purchased DT for use with DTE and found the latest version of DT does not seem to be recognised by DTE......and when I try to install the version listed in the OP it crashes during the file copy stage of setup with an event that specifies DT is not compatible "with this version of Windows".

TIA

Blazkowicz
01.07.2010, 20:16
3.3.29.0:
- Code update for vUSB driver
- Device attach problem fixed
- ProtectDisc partially support
- StarForce protection support (newest DT is required)
- Registry jumps in drive properties are added
- Virtual device properties are extended

Download link is in first post.

pseudo555
19.07.2010, 19:29
3.3.29.0:
- Code update for vUSB driver
- Device attach problem fixed
- ProtectDisc partially support
- StarForce protection support (newest DT is required)
- Registry jumps in drive properties are added
- Virtual device properties are extended

Download link is in first post.

I got redirect to "www.disk-tools.com/download/daemon+abpro+dtpro+sptd+hashcalc"

Any idea ?

AfroShaolin
10.08.2010, 10:27
I have a problem with all this and nothing seems to work for me. I have the newest DTE which is compatible with win7 and I am using DT Pro Advanced 4.10.0218 . Now I wanna play Star Wars Force Unleashed Sith Edition and I installed it and everything. cloaking the vIDE is my problem, when i start DTE I can see the drive but I can't cloak it because the SecuROM is unable to be cloaked. No Emulation is ON or whatsoever. How do I make the SecuROM cloakable?

Sway
10.08.2010, 10:34
Try to use the latest DT Pro version.

Sabrehawk
17.10.2010, 13:17
I have Pro , IDE only, 4 36 03 09 , with SPTD 1.69 , windows7 x64

DTE windows shows my only VIDE drive and nothing else which is correct since i dont have any optical drive connected.

I only use AVIRA and Windows Firewall nothing else.
The System is fresh installed with all updates and drivers.

DTE shows for VIDE (DT vendor icon) drive that NO CLOAKING IS REQUIRED and the check boxes are GREEN.

it will not stealth my drive from securom,

conflict with emulation software deteced.

doh!?!

Blazkowicz
17.10.2010, 13:40
That is normal. You have to use Load Driver feature.

Sabrehawk
18.10.2010, 14:42
I did that and it loaded the driver but after that accessing image on virtual drive slows down to a crawl !??!

or to be more specific..severe lag in using DT features such as loading the GUI, mounting image, opening folders
on the image etc.

unloaded the driver and access is rocket fast again...Oo

update: accessing files on SATA 2 drive on which the mounted image is located using explorer becomes all sluggish...
file operations stall (copy file etc) ..WTF !!! currently copying a 23 mb file within same partition with a speed of 185 kb/s ...yes KB !!!


This is SPOOKY !!!

Blazkowicz
18.10.2010, 14:43
You also assigned vUSB to vDrive?
Also which DTE version?

Sabrehawk
18.10.2010, 15:00
DTE Version from first post in the thread downloaded yesterday.

No i ddint attach...didnt know how to ..but i found it now...
(still its scary what happens to my IDE operations when using this and im talking about all operations on that SATA II drive while i have the image mounted and use DTE)

I attached the virtual drive to a unused virtual USB port and got a new Drive now plus the DT drive. I mount the image in the DT Drive
and can access it via the other drive (virtual usb) but its FREAKING SLOW . Takes about 2 minutes to load the folder structure of the image.

going to reboot..scares the shit out of me ( i just have been thru a 600 GB data loss so im a bit nervous ^^^)

ejected the virtual USB device using the windows USB safe remove Dialog, tried to unload the usb driver from insde DTE , unloading driver now
STALLS and makes no progress. Closed DTE started it up again. Driver seems not to be present any longer. (Hopefully this stuff really leaves NO
traces in my registry) I have a ASUS striker extreme, Nforce 680 I chipset (MS hotfix for nforce ehci usb 2.0 problems is present on this system)

After all these operations shutdown of windows did stall ..had to switch pc off to restart.

Sabrehawk
18.10.2010, 15:22
scandisk on F; after reboot gladly no errors found. System is back to lightning speeds...will take step back from using this software. Too bad,
but it makes me feel uncomfortable with all these weird side effects.

i hate 20 minutes edit limits ...makes life complicated on a forum which may require to edit often such as in support questions.

just in case it may be of interest:

ASUS STRIKER EXTREME (uptodate bios)
SSD OZC Revodrive PCI-E 120gb boot drive
WD 1 TB EADS 00L5B1 Sata II HD
4 GB Corsair Ram
ATI 4870 1gb GPU
Wolfdale 3.0 ghz core2duo
Creative X-FI music PCI

NOT OVERCLOCKED IN ANY WAY.

SvEgiiVEteR
25.01.2011, 13:54
4.40.0312.0214 is not working DAEMON Tools extensions v3.3.29.0

Blazkowicz
25.01.2011, 14:14
Should be fixed in next DT Pro version. Currently DTE is not really needed due to attaching feature of DT Pro.

SvEgiiVEteR
25.01.2011, 14:47
when about to wait for new DT Pro version?

Blazkowicz
25.01.2011, 17:03
There is no ETA yet, as usual.

raffairon
18.05.2012, 16:20
whre can I download the latest version? link seems dead

Terramex
18.05.2012, 18:47
Due to a new feature (http://daemonpro-help.com/en/general_use/work_with_devices/attach_to_physical_device.html?quicktabs_content_q tabs=1#quicktabs-content_qtabs) in DAEMON Tools Pro DTE is neither updated & supported nor required anymore.