PDA

View Full Version : Physical CD drive missing from explorer



ProblemChild
14.11.2002, 09:47
Installed fine and actually played a few games.
I notice however that my CD-RW drive was missing from explorer (drive letter replaced by a virtual drive). After modifying the drive letter to be past the normal set of drives and rebooting, it did not re-appear. My regular DVD drive never had a problem. Tried a bunch of things to get it back short of messing with the Registry. XP DOES see the drive (I can read a CD from within CloneCD for example). The drive is working properly, but it will NOT show up in explorer and will not autorun a CD. I tried the following, none of them restored the drive:
- Remove daemon and reboot
- Remove both drives from system and reboot (removed cable)
- Put just the CD-RW back and boot up
- Put both back
- Re-Install daemon without the physical drives and mess with the drive letters
- Put just the CD-RW back and boot up (daemon still installed)

I can go into Device Manager and see the CD-RW drive as well as the other drives (DVD and virtual) and all look good.
I am not able to change the drive letter anywhere. I know I did this once before, but for the life of me am not able to do it again.

The problem drive is a YAMAHA CRW2200E running with the base XP drivers on a AMD 1.4 system. No other CD related apps running (I disabled all the startup crap from Nero and Clony and all those).

So, what am I missing? Any suggestions would be appreciated.

Development
14.11.2002, 16:19
Disabling applications at startup will not help - you must competely unnstall them to remove their drivers from system, if any.
Do you use Nero InCD?

ProblemChild
14.11.2002, 17:43
I do no use InCD or anything else at startup that would grab the CD drive.
(Read this as no startup apps. I removed any registry startup entries associated with cd-burning software.)

I did get the problem resolved however. I shutdown and swaped the cabeling (i.e. Moved the problem drive from the Primary IDE channel to the secondary one). This solved the problem. XP saw it as a new device and re-installed it all together. Just like Windows does if you move a card from one slot to another. XP must have remembered the drive where it was even when I removed the cabel, but I never plugged the cabel into anything else on my previous tests (I know this, but just didn't remember it until after I posted :roll:). Anyway, cabels are back to there original position and both drives are now present. I do not have daemon loaded at all because of this problem. However, I would like to keep using it. I think once the change to not have the drive letters automatically be before any hardware CD drives will solve the problem. I would like to know what may have caused the problem, just out of curiosity if nothing else.

Nice job on the tool. Keep up the good work.