Announcement

Collapse
No announcement yet.

Dissable Dvd

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dissable Dvd

    Hi guyz to beat starforce i had to disable dvd-drives
    but now the only one that works is the first one which is connected with the midlle connector of the ide cable
    my ide cable for dvd drives is directly connected to the motherboard
    so the cable is

    ------------ 2nd dvd drive (doesn't work)




    ------------ 1st dvd drive (works)




    ------------- motherboard


    can anyone please help me

  • #2
    ...

    How did you disable the dvd drives in the first place? Check the wires of course to be sure they are firmly pushed in. Also check the jumper settings.
    the modern world:
    net helpmsg 4006

    Comment


    • #3
      You should only disable the drive that is configured to be the "slave" of the channel. If you remove the "master", the "slave" won't be able to function. The "master" can work alone on a cable/channel, the "slave" can not.

      There are jumpers on the drives where you can configure if it's slave or master. Make the drive you need to remove "slave". The other that always stays on should be made "master".

      EDIT:
      Oh, you meant you removed them *both* and when you enabled them again one of them didn't work?
      To contact me privately, pray. I might answer.

      Comment

      Working...
      X