PDA

View Full Version : Virtual SCSI driver not detected...



AshesFall
23.11.2005, 13:33
Reinstalled Daemontools after one of those new errors, now I get this message when I try to start it:

"Virtual SCSI driver not detected"

After I first installed Daemontools 4.0 I removed all my "real" cd-roms from the computer, don't know if that has anything to do with this.

Any help is greatly appreciated.

truepower
23.11.2005, 13:41
hi, i have the same problem, i have this problem since i unninstal "manual" because i had much problems.

bye.

Drakeboy
01.12.2005, 18:15
hi, i have the same problem, i have this problem since i unninstal "manual" because i had much problems.

bye.
I Got Exact the same Prob :mad: :confused:
Can u Guyz Help us out

cyA

Underheaven
07.12.2005, 09:35
AshesFall, truepower, and Drakeboy:
If you uninstall, reboot, and reinstall and try to launch DAEMON Tools before the reboot on the reinstall do you receive any error messages at any point in the process?

Also some more information about your computers would be helpful. What OS and Service Pack? And are you running as Administrator?

senderson
10.12.2005, 23:03
i have that same error.My windows installed some thing auto and i installed nero too.What am i gonna do?????

senderson
11.12.2005, 08:33
i have that same error.It hadn't got any problem before installed Nero.When i installed and restarted my pc gave that error

LooDos
11.12.2005, 20:19
i had the same prob and installed win new ;)
its kinda shit solution but it works for sure!

burnart
11.12.2005, 20:53
HAve the same problem, had it since DT4 was released, so I've just been using 3.47 instead.


Running Win2k sp4. Amd XP2800. Ati 9800. Msi KT400a MB/w bluetooth. (just putting info out there, if it its useful)

Have nero 6 (old ed.) installed. also steam. Have a raid driver installed thats called "Win2000 Promise Fastrak 376 Controller"

What i get under scsi &RAID controllers is "Unknown Device" when DT4 is installed. Get the errors everytime I startup my pc, otherwise I dont get anything when i try to start DT4. Nothing happenes.

Tried what you said about starting DT4 before I should restart in the install, nothing happened. No errors or nothing

sorry if Im being stupid, or missing something...hehe

KubriK
13.12.2005, 16:22
i had the same problem....but i solved (explained below).

1. uninstall any previous intallation of DT.
2. reinstall an older version of DT ( i had 3.47 )
3. install DT 4 ( select to upgrade )
4. reboot ( DT reboot request )
5. reboot again ( windows reboot request for new hardware )

newuser17
26.12.2005, 22:08
Same problem.
Explanation of steps that led to it:

Had DT v4 Loaded on Windows 2000 Pro
Upgraded to Windows XP Professional SP2
Got some startup error loading DT (sorry didn't log)
Tried reinstalling DTv4 and got a system error when trying to install the SPTD Layer (setup crashed there)
Manually uninstalled DTv4 along w/ sptd.sys
Reinstall worked, but when I tried loading DT I got "Virtual SCSI driver not detected"

Uninstalled again (not manually), installed 3.47 and upgraded to 4 and it works fine now (using KubriK's method)

KubriK
27.12.2005, 11:12
Uninstalled again (not manually), installed 3.47 and upgraded to 4 and it works fine now (using KubriK's method)

Nice, my method works :)
Btw.. (I dunno why) DD is givining me the same problem at random after boot. It's insane!


Pls debug&fix it!

Androwsama
31.12.2005, 12:09
Specs:
Windows 2k pro SP4
AMD Athlon XP 1600+
Removed all CD/DVD drives and tried with them

I've tried the steps KubriK said, but darn they don't work for me.. Tried it out lots of times, even searched Regedit for Daemon to delete every piece left of previous versions, also tried to just install DT4 the normal way and didn't work.

It just won't work, please if anyone know how to fix this problem POST IT!

Thanks in advance..

Caretaker
04.01.2006, 16:11
Get the same error of driver not dedected.


i had the same problem....but i solved (explained below).
......
5. reboot again ( windows reboot request for new hardware )

Never even get so far that windows recognises new hardware.

So back to using version 3.47 :(

daemonmulch
07.01.2006, 00:16
did quite a number of installs of DT4 already, in one installation i had this problem, but i just forgot to reboot with that installation. After reboot: no more problems...

Caretaker
09.01.2006, 21:47
....., but i just forgot to reboot with that installation. After reboot: no more problems...

If you read carefully problem persists after reboot as well.

Thougt I would get an answer to this prob on this forum, but all I can see is ppl complaining about it but nothing to solve it :mad:

ericf
10.01.2006, 22:51
I have the same problem. I had to uninstall Daemon Tools because the image got stuck and I almost didn't manage to do that. That SPTD... stuff was causing it. I couldn't uninstall and got some message that the exe file wasn't working.
Now I don't get the scsi driver to appear in the device manager.
Why?
Does anybody working on the program know why I get these messages and how to fix the scsi so that it appears? I did install the program so the drivers should work. They are installed in windows/system32/drivers folder.
I'm on Windows XP Home.
ericf

Trakos
11.01.2006, 19:06
I ahve this problem. It first occurred when I installed daemon 4.03 x 86. Later, when I was enable emulating in alcohol 120% (I have it before installing daemon), and checked also in 3.47. Chcecked the KubriK's method, nothing's happened.
Interesting thing that when using 4.03 x 86 i have unkown device in scsi category and also in other devices (here with a question mark icon)... and there isn't PnP extension...
When I am using 3.47 I have scsi driver (named... well, properly, sth I don't remember know - but there is the same problem with driver) and PnP Bios extension, but there isn't this unknown device...
Of course cdrom devices are properly show in the device manager, but as far as I remember there are some problems with drivers (there isn't any in fact :) ).
And the end, I don't see this virtual drives in explorer and disk manager...

Using win xp and some other stuff :D if you want to know something more about computer (e.g. disk or which sata or motherboard - I don;t know ;) ) just say it.

ForumTroll
16.03.2006, 23:57
Ive got the same problem :(

OS: Windows 2000 sp4
MB:Epox 9NDA3
Chipset:Nvidia nForce 3 Ultra

Had Daemon 3.47 installed upgraded to 4.03 and got no error messages throughout the installation, after first restart New Hardware Found wizzard detected device "CD Drive"(maybe they called it CD Rom) Then after 2nd restart i get the message "Virtual SCSI Driver Not Found".

Also in Device Manager after 2nd restart I have an Unkown Device under SCSI & RAID Controllers.

So far Ive tried any of the solutions Ive found on this forum and had no luck,

I had Nero 7.1.1.2 (i think too many Nero versions lol) and Alcohol 120% 1.9.5.3105 (long enough num? rofl) installed but both of their virtual drives were disabled (and had never been enabled) but since then I have uninstalled them to see if it helped (which it didnt)

I did notice that if i install D-tools 4.03 and when it gets to the 2nd restart if I choose no i'll restart later and then try to use D-tools 4.03 it works perfectly (tested with Sims2 OFB which is one of those CD protections that needs Dtools 4 to work) untill I restart my pc and then the message comes up again and daemon wont open lol

I also have RAID capabilities on my motherboard but I have not set it up or installed any drivers for the RAID yet due to not having a Floppy Drive in my PC and it says I need one to set it up,

Could this problem be caused because of the RAID not being set up?

Thinker
01.04.2006, 11:05
I was using Cyberlink PowerDVD installed with Daemon Tools v.3.47 on Windows 98, and the "virtual SCSI driver not detected" problem occurred. I tried the following procedure which seems to have worked:
1. In "add/remove programs", remove Daemon Tools; and
2. uninstall PowerDVD; then
3. re-install PowerDVD from the original program disc, and
4. re-install Daemon Tools.
I've had no problems since. Try something similar. If it doesn't work, try downloading Daemon Tools again, then repeat the above procedure.

ganjabob
19.04.2006, 22:26
I was having the same problem where with 4.03 the installer couldn't find the appropriate SCSI device and came back with device manager saying my device (daemon SCSI driver) wasn't installed properly.

I tried following Kubrick's directions but upon the reboot after updating 3.47 to 4.03 Daemon Tools errors out with "Unable to add adapter. Device problem 32."

I haven't been able to find anything with that problem code in the forums. Any assistance is greatly appreciated.

I should mention that 3.47 works without a hitch if I roll back to that version.

I'm on XPpro SP2 with no burning software or third party SCSI drivers installed.

ganjabob
19.04.2006, 22:46
So I've booted into safe mode, renamed sptd.sys and come back in to uninstall daemon tools 4.03. Unforutately now I can't uninstall because it's not showing up in 'add/remove programs' and choosing Uninstall from the programs menu states...

"Setup is unable to validate installation".

Any suggestions? Thanks.


I was having the same problem where with 4.03 the installer couldn't find the appropriate SCSI device and came back with device manager saying my device (daemon SCSI driver) wasn't installed properly.

I tried following Kubrick's directions but upon the reboot after updating 3.47 to 4.03 Daemon Tools errors out with "Unable to add adapter. Device problem 32."

I haven't been able to find anything with that problem code in the forums. Any assistance is greatly appreciated.

I should mention that 3.47 works without a hitch if I roll back to that version.

I'm on XPpro SP2 with no burning software or third party SCSI drivers installed.

alexfoo78
17.07.2006, 17:01
Hello, a new one for the problem...
I have a recent mobo with 2 Raid controllers include (SIl and NVRaid) with XP x64

I'vgot the message on start: Virtual SCSI blabla...
I look into the raid and scsi devices and found that the one DTSCSI from Deamon. Wich told that he is in conflict with something else...with the code 42.

Of course he is!!! he has been given the IRQ 0 !!! wich is the IRQ for Internal clock...

Iv'e got another computer with DT (W2K3 R2 32bits). I take a look on it and i found he has given for the device the IRQ 9...

So questions are:
- Why he has been given automaticaly this damn IRQ, there's a lot of empty IRQ !!!!
- How to change manually the IRQ, i can change the channel but noway for the IRQ... and please don't tell me to fix this in the bios... the bios can't see a virtual device...(load with the OS... not before ;) )

Jito463
17.07.2006, 17:41
What version of DTools are you installing?

alexfoo78
17.07.2006, 17:48
I use the last one, 4.03 x64 with SPTD1.25 driver...

krysx24
22.07.2006, 06:19
same here .. running WInXP x64.

scsi device in conflict on IRQ 0

http://techiq.ca/pic/scsi.jpg

oh super geek! .. help!!

krysx24
22.07.2006, 16:19
I fixed it ..

did the "STPD add" deal and then rebooted ..


all is fine. :)

Omego2K
26.02.2007, 20:50
I fixed it ..
did the "STPD add" deal and then rebooted ..
all is fine. :)

what do you mean the STPD add deal? I just started experiencing this issue, I've already tried uninstalling and deleting the driver file, nothing helped. can anybody help?

rmarjew
16.03.2007, 22:36
I had (!) the same problem:

* had to reinstall daemon tools for some reason, and then got this shit about 'no virtual scsi drive found'. fixed it though, no reason to reinstall XP. This is what i did:

1. Go to admin tools --> computer management --> services and applications --> services:
2. Restart the 'Virtual Disk Service' manually, or better make it 'automatic'. For some reason this is stopped after a reinstall.
3. Put your XP installation disk in drive D:
4. Go to admin tools --> computer management --> device manager --> scsi and raid controllers ---> properties (should still be faulthy).
5. reinstall driver from XP installation disk in drive D:

work fine for me: I run windows XP 64, with dual AMD opteron.

Jito463
18.03.2007, 16:12
If that works, that will definitely help others with the same problem. Good job and nice detail in the instructions..

Leareth
27.05.2007, 19:28
okay, what do I do if I can't find anything called: 'Virtual Disk Service' should I try doing the 3-5 steps by themselves?

sellers
30.08.2007, 12:08
1. Go to admin tools --> computer management --> services and applications --> services:
2. Restart the 'Virtual Disk Service' manually, or better make it 'automatic'. For some reason this is stopped after a reinstall.

W o r k s ! :)

sellers
30.08.2007, 12:12
okay, what do I do if I can't find anything called: 'Virtual Disk Service' should I try doing the 3-5 steps by themselves?


For me first two worked. Service shoould be restarted, not all system!

Shaitan_Deville
13.09.2007, 18:43
i tried installing DAEMON v4 on xp professional, and am getting virtual SCSI driver not detected........... will try to install 3.47 and update and will get bak to u guyz..........

Shaitan_Deville
15.09.2007, 10:32
i tried sellers method, dint work. i am unable to install 3.47, am getting code 25057 error, so cant use da upgrade method and i cant reinstall driver through xp cp cuz i lost my xp cd...........
OS:xp pro
anti-virus:NOD32
Other:Nero

forz
24.09.2007, 00:56
just reinstalled my pc yesterday and got the virtual scsi driver blabla and reinstalled windows which removed it... then DT worked.. until today where i found out my pc was infected with a virus so i did a system repair and know its making that error again.. dont feel like reinstalling windows every day :mad:

been looking around and ive seen ppl write that there is a scsi thingy in device manager with a conflict but i dont have that.. i dont have anything called scsi in there

dont have the virtual disk service in admin tools so i cant really fix my problem that way

Shockblast
19.01.2008, 06:27
Hi all
i got the same error even though i never installed nero
pllz help
i use xp sp2
i have no burning softwares installed
i'm using dt 4.10
and i dont think using previous version wud help :confused:

Blazkowicz
19.01.2008, 10:56
Try DT Lite 4.12.

LoMayoKicksA
30.01.2009, 03:56
I am having the same problem.

Daemon should remove the option during uninstall, to remove scsi adapter because this is the crap that causes all these problems!!!!

Amun
20.01.2010, 20:16
All I did was use some program called XDelBox to get rid of google redirect virus, and next time I logged in (which was the very same day), I got some message talkin' about Kernel Debugger. So I tried to uninstall it and then reinstall it, and I got "Virtual SCSI driver not detected."

So yeah, I pretty sure it's because of the XDelBox thing, I used.

But how to fix?:confused:

Sway
21.01.2010, 05:54
What DT version do you use?

Amun
23.01.2010, 01:44
The version I have is 4.03.

Blazkowicz
23.01.2010, 01:54
Try the latest one and not such an outdated version.

Amun
27.01.2010, 19:54
Thanks!: It works now. The one I had, I got 4 or 5 years ago. I never really looked for any updates, after.

Again, thanks!:D

lolzlolz
14.05.2010, 21:01
Had same problem on Windows 7 Ultimate 32. Daemon Tools v3.17.

what worked for me is Disabling UAC completely and reboot.

Sway
15.05.2010, 07:28
Note, that DAEMON Tools v3.17 doesn't support Windows 7. This version is too old.