Announcement

Collapse
No announcement yet.

DT & problems with video adapter & heating

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • evlncrn8
    replied
    Originally Posted by Copytrooper View Post
    Daemon Tools does not install any files named dm*.sys!
    You can disable SPTD layer in registry, no need to delete anything there.
    Set "Start" value in HKLM\System\CurrentControlSet\Services\sptd to 4 (= disabled).
    Note that Daemon Tools won't work with SPTD layer disabled. In order to re-enable SPTD layer change "Start" value back to 0.
    you also have to reboot after doing this...

    Leave a comment:


  • DENgerous
    replied
    OK, thanks. I've tried already to disable SPTD & it didn't help.

    Seems that it was coincidence & have no relation to DT.

    Leave a comment:


  • Copytrooper
    replied
    Daemon Tools does not install any files named dm*.sys!
    You can disable SPTD layer in registry, no need to delete anything there.
    Set "Start" value in HKLM\System\CurrentControlSet\Services\sptd to 4 (= disabled).
    Note that Daemon Tools won't work with SPTD layer disabled. In order to re-enable SPTD layer change "Start" value back to 0.

    Leave a comment:


  • DENgerous
    replied
    So it means that it installs only
    sptd.sys
    dmboot.sys
    dmio.sys
    dmload.sys
    ?

    is it possible to delete these files? Any registry keys to be deleted?

    Leave a comment:


  • Jito463
    replied
    DTools doesn't affect any original files in Windows. The only system/driver files it installs are the SPTD and the DTools drivers.

    Leave a comment:


  • DENgerous
    started a topic DT & problems with video adapter & heating

    DT & problems with video adapter & heating

    I have HP nc6000 laptop (Win XP Pro SP2 + all recent updates) & I've installed last version of DT but after reboot system could not see my video adapter - it is ATI mobility 9600, it was running in VGA mode. More over reinstallation of ATI drivers did not solve the problem so I had to go back to previous safe configuration then I've uninstalled DT.

    I've read lots of FAQs here but didn't found anybody having my problem. Installation/uninstallation of DT was OK.

    This have solved the problem of video but now PC heats _A_LOT_ it's temperature is around 80 degrees & I it switches off after some time. Exploring my laptop I've foud great heating from HDD side + I found that CD-Burner does not work properly.

    Is it possible to check what's wrong now? Maybe DT replaced some WinXP components & I simply need to bring them back? Which files/registry key can be checked.
Working...
X