Page 1 of 2 12 LastLast
Showing results 1 to 10 of 11

Thread: BSOD with DRIVER_IRQL_NOT_LESS_OR_EQUAL in PNPSHARK.SYS

  1. #1
    New User
    Join Date
    05.11.2003
    Posts
    1

    Default BSOD with DRIVER_IRQL_NOT_LESS_OR_EQUAL in PNPSHARK.SYS

    Operating System: Windows 2000 (SP4)
    Burning Software: Nero 6
    Anti-virus Software: McAfee 4.51
    DAEMON Tools Version: 3.41

    Installed Daemon tooles 3.41 on a fresh installation of Win2K (DELL Dimension 8300, P4 with HT)
    Nearby every day an BSOD with DRIVER_IRQL_NOT_LESS_OR_EQUAL in PNPSHARK.SYS without any reason (AFAIK)

    Stop 0x000000d1 (0xfdfed6f8, 0x00000002, 0x00000000, 0xbffc4291)

    Any sugestions to cure this awesome problem?

  2. #2
    New User
    Join Date
    17.01.2003
    Posts
    8

    Default

    Operating System: Win XP SP1 (clean install appart from nForce2 drivers & ATi Drivers)
    Burning Software: Not loaded yet
    Anti-virus Software: Not loaded yet
    DAEMON Tools Version: 3.41 fails, 3.33 ok

    I have the same problem. Whenever 3.41 is loaded onto my system it will fail to boot. Comes up with DRIVER_IRQL error but does not display a file name.

    I have my system working correctly with v3.33

    I have just reloaded my PC and have installed the following only

    WinXP SP1 (slipstreamed)
    nForce drivers (v3.13 with SW IDE drivers)
    ATI Cat v3.8 I think (newest as of 1/11)

    When I install 3.41 it will install but fails to restart. If I dont restart it will crash out after about 20 mins (Just reboots by itself & then fails).

    BTW, system is an SN41G2 Shuttle PC running an XP3200, AIW9700pro, IBM 185Gb HDD, Seagate 80Gb IV HDD, 6in1 USB card reader, Plextor PX-708A DVD+-RW in USB2 case, 1GB PC3200 Ram.

  3. #3

    Default

    Send latest dmp file from C:\windows\minidump to andareed@daemon-tools.cc.

  4. #4
    New User
    Join Date
    25.11.2003
    Posts
    2

    Default Re: BSOD with DRIVER_IRQL_NOT_LESS_OR_EQUAL in PNPSHARK.SYS

    Operating System: Windows 2000 SP4
    Burning Software: Nero 6.0.0.9, CloneCD 4.0.1.10, WinOnCD 6.00.980
    Anti-virus Software: None
    DAEMON Tools Version: 3.41

    >Nearby every day an BSOD with DRIVER_IRQL_NOT_LESS_OR_EQUAL in PNPSHARK.SYS without any reason (AFAIK)

    I have the same problem! It happens once every day a few minutes after I did an automaticly daily backup of my systempartition with ntbackup to a SCSI-harddrive.

    Does anyone have any suggestions?

    greetings,
    honk

    PS: I forgot to say I'm also using Alcohol 120% Version 1.4.3 (Build 410)

  5. #5

    Default

    Operating System: mustdie
    Burning Software: zippo
    Anti-virus Software: format c:
    DAEMON Tools Version: alpha

    yeah,
    that's 3.13
    i have problems too. when i start game (different) winxp dies.
    Sys. events - pnpshark
    deleted DT and all traces in registry 2. (i think)
    still problems
    after that i tried ALL Nforce SW IDE drivers and ITB dtivers 2.
    all versions. no help

    i think only 1 way left guys..
    deleting %windows% folder etc.
    and make new install.

    btw. Nvidia sucks.
    cheers.

  6. #6
    New User
    Join Date
    25.11.2003
    Posts
    2

    Default

    hi,
    I think I have solved my problrem:
    I have deactivated the virtual drive of Alcohol and Nero. Since that time the Bluescreen didn't return.
    Knocking on wood... ;-)

    Greetings,
    honk

  7. #7
    New User
    Join Date
    17.01.2003
    Posts
    8

    Default

    New version of Daemon-Tools released... 3.44

    Same problem. Windows crashes with a BSOD and IRQ_NOT_LESS_THAN.... Error at boot up.

    It still does it without any drivers or programs loaded (Clean XPSP1 install)

    It will not produce a minidump because the software to produce the dump has not loaded at that time, just a nice blue screen and a "Sorry for the error"

    Any ideas

    XPSP1 (Slipstream)
    XP3200
    SN41G2 System (nForce 2 mobo)
    1Gb ram (PC3200 DUal Channel 2x512)
    No internal CD or Floppy Drive
    Internal USB Card Reader
    Unplugged USB DVD+-RW

    I am willing to BETA test software if needed

  8. #8
    Administrator



    Join Date
    06.11.2002
    Posts
    2,044

    Default

    What address is displayed on BSOD screen?

  9. #9

    Default BSOD in pnpshark.sys or xxxx.prt.sys

    Operating System: Win2K Pro SP4 French
    Burning Software: Nero 5.5, CloneCD, CDRWin
    Anti-virus Software: Avast 4.1 Home Edition
    DAEMON Tools Version: 3.41 and 3.43

    Same prob here.

    Running Adaptec 29160 and Mylex AcceleRAID 170 RAID SCSI card (latest drivers). No WMP 7 or greater installed. Was ok in 3.33. I will try your 3.44 release and note the BSOD adress for you next time I restart my workstation.

    Thanks for your great job guys !

  10. #10

    Default

    installed 3.44 and it did the trick ! works again like a charm ! thx very much !!!

Page 1 of 2 12 LastLast

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •