Page 1 of 2 12 LastLast
Showing results 1 to 10 of 17

Thread: yasu with registry problem

  1. #1

    Default yasu with registry problem

    hi everyone,


    i want to ask a question about yasu. i have command & conquer 3 and play it with dvd but cannot with yasu and my image. On my laptop my image works good but not on my desktop ("conflict with emulation software" error i get everytime).


    i had nwn2 and played it with 1.04 version and with daemon 4.06he and yasu 1.2 (or 1.4 i dont remember). After sth i tried on my registry , nwn2 afterwards NEVER required dvd or yasu.
    but now any other game requiring yasu doesnot work, i borrowed winning eleven 2007 from my friend and couldnot get it work with image on my desktop but on laptop game runs. i only get "conflict with emulation software" with newer games on my desktop.


    i remember that i modified my registry to get nwn2 work in the past year (late 2006). i had no problem with the registry. but now only nwn2 works but any other game do not work. i realized this when i bought CnC 3.


    is there any way to reset my registry config about my drives? maybe my problem is sth else


    • i uninstalled my dvdrom-cdrom and re-installed from windows but didnot work

    • i tried to run nwn2 image patched with 1.04 on my laptop but laptop required yasu hiding to run

    • my game images seems good as they work on other computers [my laptop forexample])

    • uninstalled daemon and installed 4.09he with sptd 1.43, on my desktop still not working

    • i created my images with alcohol 120 1.9.5

  2. #2
    Experienced User
    sYk0's Avatar
    Join Date
    27.12.2005
    Posts
    392

    Default

    Sounds like SecuROM may have a conflict with some other software on you PC...

    SecuROM checks for a LOT of running applications, and if one is found it will give an error.

    "conflict with emulation software": Usually means that some sort of emulation or cd/dvd-rom cloaning application has been found.
    Fisrty if you are running Game Jackal, exit/close it.
    Also you may want to upgrade your version of Alcohol 120% (1.9.6.4719 is the latest).
    Mail:
    curerom @ daemon-tools.cc

  3. #3

    Default

    thanks for your reply,

    i do not use game jackal,
    i tried alcohol 1.9.6.4719,

    still not work

    i will uninstal nero,blindwrite,alcohol and try with that.
    as nwn2 works i dont think it will work but i will try.

    thanks

  4. #4
    Experienced User

    Join Date
    27.09.2005
    Posts
    822

    Default

    maybe securom doesnt like your blocked registry keys? try checking if any keys are blocked, or post the error code securom gives.. sometimes that helps

  5. #5

    Default

    the only error/message game gives is "conflict with emulation software".

    nothing else, looked at eventviewer, checked for game log if game creates. nothing...

    "blocked registry key" , what is this? google gave me nothing about it.

    thanks

  6. #6

    Default

    I had the same problem ( error message "conflict with emulation software"), but only for one day. This means:

    I had no problems with the newest versions of Daemon Tools and YASU. But one day I started YASU and C&C3 like every day before and I got the error "conflict with emulation software" (I changed nothing on my system).

    I tried the following:

    -reboot - startet YASU - with Image the error ocurred
    -now I tried the originally DVD - the error ocurred
    -I stopped YASU - tried with originally DVD - the error ocurred
    -reboot - tried with the originally DVD - works fine
    -started YASU - tried with originally DVD - the error occured

    After a few retries I given it up

    At the next day I start my PC (have nothing changed) - I started YASU - tried with Image - the game works fine

    Since that the error never ocurred and I have no idea where the problem comes from.

  7. #7

    Default Same exact problem on 2 of my PC's

    I have this same exact problem on 2 of my 3 PC's. . .
    WARNING: This is going to be a lengthy post.
    System Specs for all 3 PCs (no overclocks, all XP64, all latest drivers, all current Windows Updates):
    System 1:________________System 2:_________________System 3:
    AMD Athlon64 x2 6000+_____AMD Athlon64 x2 4200+_____AMD Athlon64 x2 4200+ (s939)
    nVidia nforce 590 SLI MB____nVidia nforce 4 SLI_________nVidia nforce 4 Ultra
    GeForce 8800GTS__________GeForce 7950GT___________GeForce 7900GT
    4G DDR2 PC800____________2G DDR2 PC800____________2G DDR PC400
    Onboard Snd (RTL)_________Mystique 7.1 DD Live_______Audigy 1
    Preliminaries:
    I just built System 1 (Tax Time ) and was doing a complete fresh install. System 2 is my primary rig. System 3 is my wife's PC. All YASU versions are latest 1035. Systems 1 & 3 are now running DT 4.091, System 2 is DT 4.08 (downgraded from 4.091). All DT's set to have 1 Virtual drive, and on systems 1 & 2 the driver letters are set before the physical DVD/CD ROMs. YASU is set at default options and NOT set to autorun - I run it when i need it. All Alcohol installations have their virtual drives set to 0.
    Before building System 1 this week, I bought and Imaged C&C 3 Kane Edition and played it on System 2. At the time, I had YASU 1.07 and DT 4.08. The image mounted, installed, and played fine on System 2 with C&C 3 versions 1.0 and 1.1. When I patched to 1.2, it detected the image - prior to this had never had a problem with YASU 1.07 at all. Logged in here (long time lurker) and grabbed DT 4.090 and YASU 1033. Game played great again. Patched to 1.3 - no problems, patched to 1.4 - no problems. Played the game until I beat all 3 sides, PC sometimes left on overnite at desktop, sometimes pc shut down overnite - never had a problem playing the game (DT 4.091 kept randomly unmounting my images, though). Built System 1 and installed everything fresh on it - latest versions of DT and YASU 1035, Alcohol 52% free (System 2 using latest Alcohol 120%, and System 3 also using latest Alcohol 52% Free). Installed my games, including HOMM V and expansion as well as C&C3. . . so far so good.
    The Problem:
    Heores V expansion and C&C 3 would refuse to run at all from image on System 1. Redid entire system from scratch again, and when I got to the games, tried each immediately after install and patch to find the culprit. C&C3 installed and played fine at 1.04. Got to and Installed HOMM V & expansion, patched expansion to 2.01 - BAM, Heroes V starts giving me "Conflict with Emulation Software." Tried C&C3 - now it does it too. Tried rebooting - did not help. Tried with and without YASU - neither game would work. Tried original disks - they worked fine. Uninstalled DT and reinstalled 4.091 - did not help. Tried YASU 1033 - did not help. Uninstalled Alcohol 52% - did not help. Never had a problem on System 2 with either game - and at the exact same patch revisions, too, so I decided to backtrack DT a bit. Uninstalled DT 4.091 and went back to 4.08 with YASU 1035 - worked like a champ on both games. Reinstalled Alcohol 52% again - still working. Shut down system for the night. Came back the next day, and BAM - the "Conflict with Emulation Software" message on both games again. Uninstall Alcohol 52% AGAIN - did not work. Rebooted PC, did not work. Uninstalled DT 4.08, rebooted, reinstalled 4.08 - started working again. Left PC ON overnite. Came back the next day, and the "Conflict" message is back again on both games. Uninstalled DT, rebooted, reinstalled - did not work this time. Upgraded to 4.091 again - still not working. This is where I am with system 1 right now. In the interest of curiosity, I decided to try System 2 again. . .
    Mounted the image, ran YASU 1033 - "Conflict" message. NOTHING had changed on this PC since I had last played the game on it - no new Windows Updates, no patches, no new software installed, NADA! rebooted PC - no good. Upgraded to DT 4.091 from 4.090 - no good. Updated YASU - no good. Rebooted again, just 'cuz - no good. Uninstalled Alcohol 120% - no good. Uninstalled DT, rebooted, installed 4.08 - games worked. Rebooted PC - games worked. Shutdown PC for the night. Next day - BAM, my buddy the "Conflict" message was back again. Tried original DVD - worked great. Image just kept giving me the "Conflict" message. Got the image working again by uninstalling DT, rebooting, re-installing DT again. That is where I am with system 2. . .
    System 3 works great. I upgraded it to YASU 1035 and DT 4.091 from YASU 1.07 and DT 4.08 before installing C&C3 on it (copied image from System 2 over network to her PC). My wife plays Heroes V frequently with no problems. Again all software is latest patch level. WE ARE EVEN USING THE SAME NFORCE AND GEFORCE DRIVERS (Systems 2 & 3)! C&C3 and Heroes V run on her machine without a hitch, every time. Rebooted, shutdown, left on - doesn't matter. All I have to do is run YASU and it just works - and she still has her Alcohol 52% installed. Mind you, this is the same image all the way 'round.
    Sorry for the lengthy message, but after lurking on the board the last few days and seeing people being dismissed out-of-hand for this same problem, I felt compelled to make a detailed account of my own adventures in being able to keep my COLLECTOR'S EDITION GAME DISK IN MY CLOSET. There is something fishy going on with this, and I hope by this post we can find a common denominator jacking this up and get a good workaround or fix on it. If you need any other info from me that might help, I will check this thread every few hours. Thanks.

  8. #8
    Master
    Jito463's Avatar
    Join Date
    24.05.2005
    Posts
    1,626

    Default

    One suggestion, try putting spaces in between paragraphs. It makes it easier to read long posts like that.

  9. #9
    Experienced User

    Join Date
    27.09.2005
    Posts
    822

    Default

    Quote Originally Posted by mackscynox View Post
    After sth i tried on my registry , nwn2 afterwards NEVER required dvd or yasu.
    thats what i meant by blocking registry keys, early on when securom started, people blocked permissions to certain registry keys to get round the blacklists, on newer versions of securom this usually caused problems..

    the conflict with emulation dialog usually has some hyperlink in the dialog, clicking it tells you what the problem is...

    i've never seen one with just 'conflict with emulation' and no numbers...

  10. #10

    Default

    I actually had seperated everything out in my long post, but for some reason, the board stripped them when I posted. . .

    Also, the "Conflict With Emulation Software" messages I have been getting just say that - no links, no #'s, nothing else at all other than an OK button. I was surprised at that as well, having seen the other dialog with the specific error code and links before. . . It can't really be a conflict with emulation software though, otherwise the original DVD would not work in the system either - but the original ALWAYS works. I am beginning to suspect it may be a problem with SPTD 1.43 - let me tell you why:

    Before upgrading to DT 4.090 on System 2 (see above post), didn't have any problems at all. Upgraded to 4.090 (using SPTD 1.43 - had already manually updated to 1.42 a while earlier to fix something else a while ago) - works for a while then quit. Backtracked to DT 4.08 and get intermittent success. Mind you this problem showed up after upgrading DT, AND STAYED EVEN AFTER GOING BACK TO 4.08. I am going to try and remove SPTD 1.43 and go back to 1.42 w/DT 4.08 to see if that makes a difference.

Page 1 of 2 12 LastLast

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •