Showing results 1 to 1 of 1

Thread: How to put MORE than ONE WinPE distribution on a bootable DVD

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Ausrufezeichen How to put MORE than ONE WinPE distribution on a bootable DVD

    Hi guys

    Suppose you'd like to have a dvd with Vista/Win7 setup files(installation disk) PLUS ERD Commander, Active Boot Disk, ESET SysRescue or any other custom made WinPE that you built, on a multiboot CD/DVD, so you could chose which one you'd like to boot.

    How do you do it?
    Answer: very easy if you know where to look

    I had the same problem until a guy from Ultraiso forum -varun037- gave me the perfect solution. Here it is, I'll spare you the details. Thank you varun037!


    complete procedure...

    use the default WinVista or any WinPE dvd.

    copy the contents to the HDD

    the structure would be

    dvd1 | - Project Root
    | - BOOT (CONTAINS THE BCD FILE TO BE EDITED)
    | - EFI
    | - SOURCES (CONTAINS THE PE .WIM FILES)
    | - OTHER FILES

    In the boot folder we need to run the command

    bcdedit /store bcd /ENUM

    This will give you the details of old entry in the boot loader.

    You need to note the guid. In every case the default guid is {7619dcc8-fafe-11d9-b411-000476eba25f}

    Code:
    bcdedit /store bcd /enum
    Code:
    Windows Boot Manager
    --------------------
    identifier              {bootmgr}
    description             Windows Boot Manager
    locale                  en-US
    inherit                 {globalsettings}
    default                 {default}
    displayorder            {default}
    toolsdisplayorder       {memdiag}
    timeout                 30
    
    Windows Boot Loader
    -------------------
    identifier              {default}
    device                  ramdisk=[boot]\sources\boot.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
    path                    \windows\system32\boot\winload.exe
    description             Windows Setup
    locale                  en-US
    inherit                 {bootloadersettings}
    osdevice                ramdisk=[boot]\sources\boot.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
    systemroot              \windows
    detecthal               Yes
    winpe                   Yes
    ems                     Yes
    First you'd like to see the existing boot entries in the BCD store.

    bcdedit /store bcd /ENUM
    *** note the old guid

    Then you copy the default boot entry to a new entry in the bcd store, that has to be updated.

    bcdedit /store bcd /copy {default} /d "Active Boot Disk"

    *** new guid is given at this stage

    Active Boot Disk is the description I'd like to use for my Active Boot Disk WinPE.

    Code:
    operation completed successfully.
    {613fe2f0-2356-11de-bf6a-001e4cdc40b1}
    ***{613fe2f0-2356-11de-bf6a-001e4cdc40b1}=new guid
    It can be different for you.

    therefore my new guid is {613fe2f0-2356-11de-bf6a-001e4cdc40b1}

    now

    bcdedit /store bcd /set {newguid} DEVICE ramdisk=[boot]\sources\boot32.wim,{oldguid}

    boot32.wim being the name I chose for the Active Boot wim file. You can rename it as you like, but you can not use spaces.

    Code:
    operation completed successfully.
    next

    bcdedit /store bcd /set {newguid} OSDEVICE ramdisk=[boot]\sources\boot32.wim,{oldguid}

    *** boot32.wim is the file copied from the active boot disk (boot.wim renamed)

    *** to check whether the bcd store has 2 ramdisks
    bcdedit /store bcd /ENUM


    Code:
    Windows Boot Manager
    --------------------
    identifier              {bootmgr}
    description             Windows Boot Manager
    locale                  en-US
    inherit                 {globalsettings}
    default                 {default}
    displayorder            {default}
                                    {613fe2f0-2356-11de-bf6a-001e4cdc40b1}
    toolsdisplayorder       {memdiag}
    timeout                 30
    
    Windows Boot Loader
    -------------------
    identifier              {default}
    device                  ramdisk=[boot]\sources\boot.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
    path                    \windows\system32\boot\winload.exe
    description             Windows Setup
    locale                  en-US
    inherit                 {bootloadersettings}
    osdevice                ramdisk=[boot]\sources\boot.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
    systemroot              \windows
    detecthal               Yes
    winpe                   Yes
    ems                     Yes
    
    
    Windows Boot Loader
    -------------------
    identifier              {613fe2f0-2356-11de-bf6a-001e4cdc40b1}
    device                  ramdisk=[boot]\sources\boot32.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
    path                    \windows\system32\boot\winload.exe
    description             Active Boot Disk
    locale                  en-US
    inherit                 {bootloadersettings}
    osdevice                ramdisk=[boot]\sources\boot32.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
    systemroot              \windows
    detecthal               Yes
    winpe                   Yes
    ems                     Yes
    like this you may add n number of vista pes... (i have tested 3 PEs + Windows Vista Setup) to the BCD Store. Just you have to keep the oldguid to same as {7619dcc8-fafe-11d9-b411-000476eba25f}

    {7619dcc8-fafe-11d9-b411-000476eba25f} will never change... that's the rule.

    copy the boot.wim file in sources folder of active boot disk/ ghost pe/ erdcommander 6.0 to the sources folder in disk1 in the project. and rename it to desired. i renamed it to boot32.wim you may use any...

    {default} is not a variable and need not be changed.


    Next
    This is a script that automates the above process:

    Code:
    Rem BCD (boot configuration data) editor for multiple vista pe
    
    REM THIS IS THE ORIGINAL BCD FILE EXTRACTED FROM ANY VISTA WINPE / VISTA DVD (I USED VISTA INSTALLATION)
    set BCD-File="c:\bcd 1\BCD"
    
    REM SET THE NAME FOR THE VISTA PE HERE
    set pename="Your PE Name"
    
    REM SET THE NAME FOR THE WIM.FILE HERE WITH PATH
    set filena=[boot]\sources\yourwimfile.wim
    
    for /f "eol=r tokens=1-2" %%a in ('bcdedit /store %BCD-File% /ENUM all') do set rdo=%%b
    
    
    for /f "tokens=1-7" %%a in ('Bcdedit /store %BCD-File% /copy {default} /d %pename%') do set guid1=%%g
    bcdedit /store %BCD-File% /set %guid1:~0,38% DEVICE ramdisk=%filena%,%rdo%
    bcdedit /store %BCD-File% /set %guid1:~0,38% OSDEVICE ramdisk=%filena%,%rdo%
    
    bcdedit /store %BCD-File% /ENUM
    Run it as many times as you like to add multiple pes after changing the variables - bcd-file, pename, filena
    remember not to use any spaces in filena variable.


    ENJOY!
    kukubau
    Last edited by kukubau : 13.04.2009 at 20:23
    So, mother goose has been messin' around in your egg salad, huh kid?

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •