Announcement

Collapse
No announcement yet.

It's baroken. 25002, Yes *that* 25002. Please read.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • It's baroken. 25002, Yes *that* 25002. Please read.

    Operating System: Windows XP w/SP2
    Burning Software: Nero 6.3.1.25, CDRWIN 3.8g
    Anti-virus Software: Zip, Zilch and nada
    DAEMON Tools Version: Currently none. Previously 3.29. Wanting 3.47

    Ok. So another victim of the 25002 error. With a TWIST!

    I went through the steps in common solutions ( though they didn't apply since I was using such an old version, which used st3mp28 and st3mpbus as it's keys )

    So I removed those. I removed Alchol 120 and its files a347*.

    Nothing remaining in device mangler, nothing up my sleeve.

    STILL getting 25002. Please do not re-direct me to common solution. I've read over it four times and ensured there are no remnants of any other virtual drives.

    I am at a complete loss here. HELP! Thanks.

    Oh, am I blind or is there not an attachment button here? Would like to attach the daemon.log if it would be helpful (but I doubt it :? )


    -edit-

    Went as far as uninstalling Nero, just in case ImageDrive (which I NEVER use) was interfering... Nope, same deal....

  • #2
    Error 25002 (invalid driver names or driver conflict), or how to remove Daemon Tools drivers

    You need to reboot after many steps when following the manual removal instructions in the Common Problems and Solutions forum.

    Can you list every key name underneath
    HKLM\SYSTEM\CurrentControlSet\Enum\SCSI
    put them on separate lines and include even the stupid ones like hard disks and whatnot.

    example.
    CdRom&Ven_Generic&Prod_DVD-ROM&Rev_1.0
    CdRom&Ven_LITE-ON&Prod_LTR-40125S&Rev_ZS08
    CdRom&Ven_PIONEER&Prod_DVD-RW__DVR-105&Rev_1.30
    CdRom&Ven_V386&Prod_STEALTH_DVD&Rev_1.0h
    Disk&Ven_Maxtor_6&Prod_Y120L0&Rev_YAR4
    Disk&Ven_WDC_WD16&Prod_00JB-00GVA0&Rev_08.0
    __________________________________________________ ___
    the modern world:
    net helpmsg 4006

    Comment


    • #3
      For manual removal instructions regarding such old version check these threads:


      Also ensure you delete obsolete Daemon Tools driver files you mentioned.
      Everybody be cool! You, be cool!
      They'll keep fighting! And they'll win!

      Comment


      • #4
        Tried all that unfortunately.

        Daemon Tools isn't listed under Installer\Products anywhere.
        And I've already removed the plug and play bios extensions from device manager.

        Deleted the st3mp*.sys files as well.

        Rebooted counteless times.

        Hey Underheaven might have something. Here's the contents of Enum\SCSI

        CdRom&Ven_AXV&Prod_CD/DVD-ROM&Rev_2.1b (AXV = Alcohol doesn't it? I uninstalled that...)
        CdRom&Ven_AXV&Prod_CD/DVD-ROM&Rev_2.2a (Two of em!?)
        CdRom&Ven_Generic&Prod_STEALTH_DVD&Rev_ (Hmm... Old D-Tools?)
        CdRom&Ven_NERO&Prod_IMAGEDRIVE2&Rev_2.26 (Re-installed Nero btw)
        Disk&Ven_Promise&Prod_2+0_Stripe/RAID0&Rev_1.10

        Backed up the Enum\SCSI key to reg file. Deleting random keys (fun, ain't it?) and Rebooting.

        Will report back with details.

        Well, reporting back now..

        Removed the AXV and STEALTH_DVD drives and restarted.

        Attempt to install dtools 3.47. Same error..

        Just for grins, removed Nero ImageDrive and restarted.

        Attempt to install dtools 3.47. Same error again...

        Any other ideas?

        Comment


        • #5
          No other ideas then... I take it?

          Comment


          • #6
            FIXED IT!!!!!

            Re-installed 3.29. Disabled all Virtual Drives.

            Did not reboot.

            Uninstalled 3.29.

            Did not reboot.

            Installed 3.47 (Did not change driver names) successfully!!!!

            Comment

            Working...
            X