Page 1 of 2 12 LastLast
Showing results 1 to 10 of 11

Thread: Safedisc 2.9 problems

  1. #1

    Default Safedisc 2.9 problems

    Hi guys, I see on various forums that problems with this version of safedisc are increasing... games which work with some readers and not with other and so on... even if the cd is burned with liteon 48-52x and latest version of Alcohol. Any idea of how it works.

    Greetings
    Massi

  2. #2
    New User
    Join Date
    01.07.2003
    Posts
    2

    Default

    exactly my problem, I've got Sims Deluxe (German) with Safedisc 2.90 and a liteon 48x, I tried Alcohol 120% CloneCD 4.2.0.2, Image creation, Image burning, virtual CD-drive with Alcohol, CloneCd and DT, enabled/disabled: hide CD-R Media in CloneCD/Alcohol, Safedisc emulation in DT

    reading/writing always 1x (even if I know the drive cannot do less than 4x)

    Any suggestions ?

  3. #3
    New User
    Join Date
    01.07.2003
    Posts
    2

    Default

    After one more try I found out what to do, I had to activate the safedisc emulation in DT and AFTER doing that i grabbed the image with Alcohol120% using the default Safedisc2 settings from there, now every thing works fine and i can use the image as a virtual disk.

  4. #4

    Default

    Thank you for this report!!

  5. #5
    New User
    Join Date
    24.10.2003
    Posts
    2

    Default

    Ok Q.

    Let say we have an image of the CD we want to make a backup of, the image works fine but when I burn a copy of it, it's a no go. I have just only tried Nero, maybe if I done it with Alcohol it would be fine? (the game is using Safedisc 2.90.

    Thanks,
    RIP!

  6. #6

    Default

    exact, Nero isn't capable of burning cd's which are protected with modern
    "copyprotections", like SecuROM, Safedisk etc.

    Instead try using Alcohol 120%

  7. #7
    New User
    Join Date
    23.08.2003
    Posts
    16

    Default

    But you can burn the whole image on CD with NERO without "extracting" it .
    Or is this not possible too?

  8. #8

    Default

    of course this is possible. You can even mount it from the CD.

  9. #9
    New User
    Join Date
    23.08.2003
    Posts
    16

    Default

    But only if the image is small enough. Can I shrik it ?
    And it doesnґt matter what kind of CP. The image will allways work, right??

  10. #10
    New User
    Join Date
    15.07.2003
    Posts
    12

    Default

    You guys havn't tried BlindWrite5 yet, have you? I havn't either but if one of you could check it for Safedisk 2.9... That might work. I know that program works for Securom 4.8x protected discs though so it might work for Safedisc 2.9.

Page 1 of 2 12 LastLast

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •