i installed daemon tools v4.08 and it asked to reboot so i did, but after reboot and install, the virtual drives works fine, just that my original 2 physical dvd drives are gone!!! i tried uninstalling daemon tools and reinstalling it, but they don't come back!!! please help me
Announcement
Collapse
No announcement yet.
real dvd drives missing after install
Collapse
X
-
Figured I should save the trouble of making a new topic.
I tried doing what you said in the common problems topic related to this, but I don't appear to have either upperfliters or lowerfliters in HKLM\SYSTEM\CurrentControlSet\Control\Class\{4D36E 965-E325-11CE-BFC1-08002BE10318}.
What should I do now? =\
-
I have the same problem.
I made some investigations for a few ours and here is the result (a little strange I think).
After installing DT 4.09.1 and rebooting WITH ANY disc in real DVD drive (I have Optiarc DVD RW AD-7173A) then all OK.
But after booting WITHOUT disc in real DVD drive then I can't read any disc in this drive and after scanning for hardware changes in Device Manager real DVD-drive completely disappears. Reboot with disc in real drive sometimes solves the problem and sometimes not. But after uninstalling DT then I again can access real DVD drive in all cases.
Could anybody shed some light on this?
I'm using Win XP SP2.
My configuration: Core2Duo E6600, ASUS P5B, 2GB Corsair DDRII-800.
Thank you,
Andrey.
Comment
-
Just one more tip:
I don't face this problem after installing SPTD 1.43 only.
It comes after installing DT 4.09.1 itself. So, this problem related to DT itself, not to SPTD driver.
FYI: I don't have either UpperFliters or LowerFliters in HKLM\SYSTEM\CurrentControlSet\Control\Class\{4D36E 965-E325-11CE-BFC1-08002BE10318} and I've reinstalled Windows Media Player already.
Comment
-
Originally Posted by Teliol View PostI have the same problem.
I made some investigations for a few ours and here is the result (a little strange I think).
After installing DT 4.09.1 and rebooting WITH ANY disc in real DVD drive (I have Optiarc DVD RW AD-7173A) then all OK.
But after booting WITHOUT disc in real DVD drive then I can't read any disc in this drive and after scanning for hardware changes in Device Manager real DVD-drive completely disappears. Reboot with disc in real drive sometimes solves the problem and sometimes not. But after uninstalling DT then I again can access real DVD drive in all cases.
Could anybody shed some light on this?
I'm using Win XP SP2.
My configuration: Core2Duo E6600, ASUS P5B, 2GB Corsair DDRII-800.
Thank you,
Andrey.
BTW you can restore the drives by unisntalling Demon Tools and then installing the Jmicron driver that you can find in the ASUS website..hope this helps
Comment
-
Problem solved..
Hi, I encountered the same Problem on my Vista x64 config. First the Daemon-Tools stopped to work, and the real DVD drive as well.
I went throught this Post and as the Development said,
its all about some other drivers conflicting with windows drivers.
I went to Administrative Tools/Event Viewer (btw: thats what the event viewer is for, for looking what actually happens in your system, so start there!)
and founded the following entry under System marked as Error (red circle with !)
\SystemRoot\SysWow64\Drivers\VD_FileDisk.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
So the problem is the VD_FileDisk.SYS driver, regedit.exe, deleted all entries with VD_FileDisk.SYS,
deleted the File as well.
I also founded this entry:
The following boot-start or system-start driver(s) failed to load:
PxHlpa64
VD_FileDisk
DEVELOPMENT: is any of the .sys above part of DT?
PXHlpa64? Don't know what that is, but after looking into this file i founded its from 2005. Deleted, removed all entries from registry.
I rebooted with Bootloging enabled, no errors, no problems. Opened Device Manager, DVD drive all functional
Im gonna reinstall Daemon Tools and share my insights.
So people, check out your event viewer and look for *.sys errors in it.
Good luck,
Synapsis
Comment
-
Originally Posted by Synapsis View PostHi, I encountered the same Problem on my Vista x64 config. First the Daemon-Tools stopped to work, and the real DVD drive as well.
I went throught this Post and as the Development said,
its all about some other drivers conflicting with windows drivers.
I went to Administrative Tools/Event Viewer (btw: thats what the event viewer is for, for looking what actually happens in your system, so start there!)
and founded the following entry under System marked as Error (red circle with !)
\SystemRoot\SysWow64\Drivers\VD_FileDisk.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
So the problem is the VD_FileDisk.SYS driver, regedit.exe, deleted all entries with VD_FileDisk.SYS,
deleted the File as well.
I also founded this entry:
The following boot-start or system-start driver(s) failed to load:
PxHlpa64
VD_FileDisk
DEVELOPMENT: is any of the .sys above part of DT?
PXHlpa64? Don't know what that is, but after looking into this file i founded its from 2005. Deleted, removed all entries from registry.
I rebooted with Bootloging enabled, no errors, no problems. Opened Device Manager, DVD drive all functional
Im gonna reinstall Daemon Tools and share my insights.
So people, check out your event viewer and look for *.sys errors in it.
Good luck,
Synapsis
Comment
-
-
this file should be in the top of Common Problems and Solutions...
just there : http://forum.daemon-tools.cc/f26/my-...s-missing-440/
Comment
-
here the official link:
right click
save as
double click on the file
Comment
Comment