To post new answers or open threads, you need to log in. The registration is closed now, sorry. If you are not a member, you are welcome to read the posted content without any limitations. If you have any DAEMON Tools related question, contact our support team.
Started Daemon Tools Setup 4.06HE with Admin rights.
Setup startet... automatically reboot... started setup
again with admin rights... installed DT. finish
Started Daemon Tools Setup 4.06HE with Admin rights.
Setup startet... automatically reboot... started setup
again with admin rights... installed DT. finish
easy, isn't it?
btw: mounting images works of course!
already posted but...
Yes daemon 4.06he works 100% with latest 5744 x86 32bit
I can't seem to install it at all on RC2 5744... I start the installation program (as administrator)and get the SPTD warning, but after that nothing happens.
I can't seem to install it at all on RC2 5744... I start the installation program (as administrator)and get the SPTD warning, but after that nothing happens.
Anyone else experiencing this?
I have same problem. It was working with Vista x64 RC1. Then I upgraded Vista x64 to RC2. Now it gives an error on startup:
Code:
Initialization error 0.
This program requires at least Windows 2000 with SPTD 1.28 or higher.
Kernel debugger must be activated.
So I thought upgrading Vista has overwritten some things so installing Daemon Tools again may fix. However I cant install Daemon Tools, because setup quits without a message after I click "OK" at SPTD install warning message. Also I cannot uninstall it since its uninstall information is somehow lost during Vista upgrade.
I have same problem. It was working with Vista x64 RC1. Then I upgraded Vista x64 to RC2. Now it gives an error on startup:
Code:
Initialization error 0.
This program requires at least Windows 2000 with SPTD 1.28 or higher.
Kernel debugger must be activated.
So I thought upgrading Vista has overwritten some things so installing Daemon Tools again may fix. However I cant install Daemon Tools, because setup quits without a message after I click "OK" at SPTD install warning message. Also I cannot uninstall it since its uninstall information is somehow lost during Vista upgrade.
1.try to delete file c:\widnows\system32\drivers\sptd.sys
2.reinstall dt
I have the same error as Dbl2010 except I am using 5733 x86 32 bit.
I upgraded from Vista build 5728 to 5744. I already had Daemon Tools 4.06 installed but it did not give me the drive letters (refer to posts about 5728). I knew a new version of Vista was coming, so I did not bother trying any of the fixes in the other topic and just waited till 5744 came out. When I did the upgrade, I got the error message mentioned earlier.
Code:
Initialization error 0.
This program requires at least Windows 2000 with SPTD 1.28 or higher.
Kernel debugger must be activated.
I tried reinstalling Daemon Tools 4.06 (as administrator) and get the SPTD warning, but after that nothing happens. Everytime I reboot the computer I get the Initialization error. I tried renaming the file c:\widnows\system32\drivers\sptd.sys
to sptd_old.sys as mentioned in the previous post and it still would not install (still starts the install process, get the warning then nothing). I tried rebooting after that, still got the initialization error message. In fact if i try and load daemon tools manually, i get the same error message. If I try to uninstall the tools it says "setup is unable to validate instalation."
Anybody who has any thoughts or help on this problem would be greatly appreciated. Thanks,
I upgraded from Media Center 2005 to RC1 and forgot to remove daemon tools 4.03 which is not compatible with build 5600. In any case, I had the same problem with removing and getting the newer version installed. Following the advice of this post, I removed the sptd.sys file. As well, a registry search found two references to it in the "last known good" section of the registry. I found them in:
HKLM\system\currentcontrolset001\services\sptd
HKLM\system\currentcontrolset002\services\sptd
I searched for "sptd.sys" to find them, and then deleted both values. Additionally, the initialization error can be removed by disabling the daemon tools from trying to load at logon with msconfig or a tool like autoruns from sysinternals.com.
After that, I rebooted the machine and ran daemon 4.06 setup with no issues.
I upgraded from Media Center 2005 to RC1 and forgot to remove daemon tools 4.03 which is not compatible with build 5600. In any case, I had the same problem with removing and getting the newer version installed. Following the advice of this post, I removed the sptd.sys file. A well, a registry search found two references to it in the "last known good" section of the registry. I found them in:
HKLM\system\currentcontrolset001\services\sptd
HKLM\system\currentcontrolset001\services\sptd
I searched for "sptd.sys" to find them, and then deleted both values. Additionally, the initialization error can be removed by disabling the daemon tools from trying to load at logon with msconfig or a tool like autoruns from sysinternals.com.
After that, I rebooted the machine and ran daemon 4.06 setup with no issues.
Hope this is helpful.
Thank you, that was very helpful. Works like a charm now.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment