SPTD conflict

[syscrash]

I am using Daemon tools with 1.53 version of SPTD. It installs ok and actually work perfectly. The problem is when I try an use my LG-GGC-H20L Blu-ray HD-DVD player. Device recognizes the player and the virtual player and show no conflict. But as soon as I put a disc in the drive I get the BSOD. As long as I don't load SPTD at start up the DVD player plays perfectly. My current solution is leave SPTD unload when not in use. When needed reboot load SPTD and remember to not use the DVD player. I tried looking at the minidump but it is nothing but unprintable characters. Any other combo drive users having the same problem?

[syscrash]

STPD conflict resolution

I posted about the problem I am having with my DVD drive not working only when STPD is loaded. I was reading that pro advance has an IDE emulation and I was wondering if this might be a solution to my problem. since my dvd drive is a SATA drive and STPD is trying to emulate a SCSI and they are both on the same IRQ. I was thinking that making STPD an IDE device might resolve the conflict.

[Copytrooper]

SPTD does not create any device at all. This is all done by Daemon Tools.
Do you have any minidump related to that BSOD (check Windows\Minidump folder)? Send newest file to support@daemon-tools.cc for analysis.
Do you have AnyDVD or similar software installed?

[syscrash]

still getting BSOD

I sent the minidump, has there been any progress on what the problem is. On my end there has been some progress. removed all parts of deamon tools and sptd reinstalled the most current version of deamon tools. Now it will play data and audio CD but still get bsod with DVD disk.

Video Card
Name NVIDIA GeForce 8600 GT
PNP Device ID PCI\VEN_10DE&DEV_0402&SUBSYS_C7563842&REV_A1\4&228 469D0&0&0048
Adapter Type GeForce 8600 GT, NVIDIA compatible
Adapter Description NVIDIA GeForce 8600 GT
Adapter RAM 512.00 MB (536,870,912 bytes)
Installed Drivers nv4_disp.dll
Driver Version 6.14.11.6921
INF File oem8.inf (nv4_NV3x section)
Color Planes 1
Color Table Entries 4294967296
Resolution 1280 x 1024 x 60 hertz
Bits/Pixel 32
Memory Address 0xF8000000-0xF8FFFFFF
Memory Address 0xE0000000-0xEFFFFFFF
Memory Address 0xF6000000-0xF9FFFFFF
I/O Port 0x0000BC00-0x0000BC7F
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003DF
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nv4_mini.sys (6.14.11.6921, 7.09 MB (7,435,392 bytes), 6/2/2006 7:53 PM)

DVD Drives
Drive D:
Description CD-ROM Drive
Media Loaded No
Media Type CD-ROM
Name HL-DT-ST BDDVDRW GGC-H20L
Manufacturer (Standard CD-ROM drives)
Status OK
Transfer Rate Not Available
SCSI Target ID 2
PNP Device ID IDE\CDROMHL-DT-ST_BDDVDRW_GGC-H20L_______________1.00\314B3744394232423034203120 20202020202020
Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 8/10/2004 5:00 AM)

Drive E:
Description CD-ROM Drive
Media Loaded No
Media Type CD-ROM
Name YN1550P URB251P SCSI CdRom Device
Manufacturer (Standard CD-ROM drives)
Status OK
Transfer Rate Not Available
SCSI Target ID 0
PNP Device ID SCSI\CDROM&VEN_YN1550P&PROD_URB251P&REV_1.01\5&36E 5972&4&000
Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 8/10/2004 5:00 AM)

[syscrash]

problem resolved

deamon tools and DVD now play really nice together.

The problem was the IDE drivers.

My mother board has the nvidia chip set. thus minidump showed a conflict with the nvata.sys driver. I tried using the most current driver from the mother board, no work I even tried the most current from NVIDIA still not fixed. Just for grinds and giggles I removed all NVIDIA drivers and let the system use the windows default driver. What do you know problem fixed. Have not seen any down side to using the window drivers instead of the NVIDIA drivers. If anyone knows of anything I should lookout for let me know.

[Someonez]

I got the same problem as you did. how do u remove the nvidia drivers? can u elaborate a bit more?

[Terramex]

I got the same problem as you did. how do u remove the nvidia drivers? can u elaborate a bit more?

There should be an NVIDIA entry in Add/Remove Programs list; after you've clicked 'Remove' you can choose to remove single driver of the Forceware package.