Daemon Tools Pro drive error: -1

[louiebeck]

Whats OS and exact DAEMON Tools version
Thanks , ??

[Terramex]

Please uninstall DT Pro & SPTD (the latter with the standalone installer from Duplex Secure).

Then remove possibly existing filter drivers with ImgBurn as described here:
No virtual drive in My Computer | DAEMON Pro Help

Reboot and install latest DT Pro Version 5.0.0316.

P.S.: if you don't want to use any Mountspace feature disable/uncheck both options in Preferences/Media info

[isaac12345]

Thanks!

I selected the play option.

Then I selected the Insert a supported disc option after mounting the .mdx file that I need to use. Then it did its thing and took me to a window that says troubleshooting is complete. But the message on the window says that - "we detected some problems with your system and were able to successfully apply the fixes. However our verification shows that the problem sitll exists". I tried adding the virtual IDE drive and it didnt work so the message was correct.
I have attached the result report to this message for your consideration.

Cheers!

[Terramex]

The "Play" option.

[isaac12345]

Which option do I select at the question "Are you trying to play or burn a disc"? "Play" or "Burn"?

I clicked on - "Detect problems and apply the fixes for me", then "BD-Rom Drive(h" to get there.

[Terramex]

Isnt that for physical optical drives though?

It's for virtual ones as well - or more precisely Windows handles both types the same way.
For example have a look here: http://forum.daemon-tools.cc/f19/sto...ook-sys-29162/
Most likely also a filter conflict on your system.

[isaac12345]

Isnt that for physical optical drives though?

By the way I noticed in my device manager that under storage controllers, "AV8JE3YQ IDE controller" is marked with an exclamation mark with the devices status as "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"

Is that related to this problem? I googled the controller and it came up with no results :\

[Terramex]

Please try this Microsoft FixIt solution: Your CD or DVD drive can't read or write media

[isaac12345]

Tried it. Didnt work. Getting the same problem. :\

[Sway]

Download the latest SPTD driver from DuplexSecure - Downloads.
Run SPTD setup and click "Update", then reboot your system.
After reboot run SPTD setup again to check if the driver is successfully installed (you will see text like "same sptd version was detected").
Then start DTPro and check the problem.

[isaac12345]

Hi,

I have DT Pro Advanced Edition 4.41.0315.0262 installed and getting the "pro drive error -1" message when I try to add a virtual IDE drive. I dont get it when I try to add a DT virtual drive. I tried the driver signature enforcement solution and re-installing solution but they didnt work. Any other suggestions?

[cristianused]

try installing 3.47 if u use xp, much better and stable than the others on xp and uses little memory

[pEtRiN]

Daemon tools pro driver error: 1500

Hi, I dont know if posting this here is not right but I have a question I have the daemon tools lite version 4.40.2 with WIndows XP Pro w/Service Pack 3. I tried to turn it on today and it gave me that error also when I installed like two days ago every time I tried to start it up it said updating virtual devices and every time it did that it asked for a reboot and never started. If I can get some help with that it will be greatly appreciated, Thanks a lot.

[Berber013]

Hey guys,
I'm having about the same problem...
first time I started Daemon Tools for Windows 7 (Latest version) it said I didn't have a virtual drive... it gives me an error message saying: Pro Driver Fout: 3
I don't get any of this and I don't know how to make it all work, cause I really want it to work fast! :P

Please help me!

Thanks!

[assort]

hmm

i had the same problem, and it worked! now i just have a new problem:
Daemon tools pro driver error: 3

anybody who can help?