DT 4.3.55 & Windows 7 - Can't Add Virtual Drive

[CaryInIdaho]

What is it saying in Device Manager -> Computer?

ACPI x64-based PC

[Blazkowicz]

What is it saying in Device Manager -> Computer?

[CaryInIdaho]

Response is a little slow, so I decided to try DT Pro and see if there was any difference. Well, there is! I get a different error message. ARGH! I now get "Unable to add adapter. Device Problem 12".

Now, being the way I am, I did a query on DT's help site and it doesn't find anything having to do with the above error. Any thoughts???

Frustration is setting in!

Cheers...

[CaryInIdaho]

Nope, that isn't the option.

Please use contact form, describe your problem there and a link to this thread, thank you.

If the support guys helped you successfully, please post the solution here - other uses may have the same problem.

Will do!

Thanks! Cheers...

[Blazkowicz]

Nope, that isn't the option.

Please use contact form, describe your problem there and a link to this thread, thank you.

If the support guys helped you successfully, please post the solution here - other uses may have the same problem.

[CaryInIdaho]

You already tried that DAEMON Tools Professional Help: Unable to add adapter ?

Yes. That is what sent me down the road of figuring out SPTD. After reviewing some posts on the SPDT authors site, I was finally able to get SPDT x64 v1.62 installed correctly. Or, at least it acted like it was installed correctly. I then performed an installation of DT and it also acted like SPDT was installed fine.

As for the ACPI setting in BIOS, I have an HP Z400 workstation and I don't see a specific setting to 'enable' ACPI. I do see options for ACPI S3 Hard Disk Reset and ACPI S3 PS2 Mouse Wake Up. Is this what you are referring to? If so, it didn't work either.

Any other thoughts? Thanks for the reply!!!

Cheers...


Cary

[Blazkowicz]

You already tried that DAEMON Tools Professional Help: Unable to add adapter ?

[CaryInIdaho]

I have tried to install the latest version of DaemonTools on to a new Windows 7 Ultimate x64 system. I had nothing but problems trying to get SPTD to install properly. After numerous Google's, I found enough information about the problem that I was able to install SPTD by itself. After rebooting, I attempted to install DT again. Installation appears to have completed succesfully, however, I still cannot get a virtual device to be added.

When I click to add a new virtual drive, I see a AXXXXX IDE Controller showing up in Device Manager after clicking OK to SCSI adapter has to be enabled dialog. I then see DT saying it is "Adding Virtual Device". I then get "Unable to add adapter" error message followed by "Unable to unmount image" error message. Once I have clicked OK, the IDE Controller disappears from Device Manager.

What the heck is going on? I have used Daemon Tools for years and never had these types of issues. Any thoughts???

Thanks in advance! Cheers...


Cary