Translations Of Daemon Tools ! Read Inside !

[Hanschke]

I think many translator use the reshacker for creating new dlls. In my opinion it is very buggy and found a better solution i think. It is called Restorator 2007 (http://www.bome.com/Restorator/). I have written the sales department (cause it is a trial) and they told me that they will grant discount if 5 or more people plan to buy this application.

there are 2 solutions atm if u want to buy it. 60 euro for lifetime licence and 30 euro for student but no lifetime support.

maybe we will find here some people to get a good discount with lifetime licence. i plan to buy the software cause the trial is near the end.

Please write me a pm if you are interesting. Thx for your attention

[Tanatos]

Spanish translation 4.10

Hi, I have sent the Spanish translation for Daemon Tools 4.10 to LocutusofBorg.

Greetings.

[Hanschke]

The german translation of the DT Lite, Basic, Standard und Advanced can be found here:

http://www.daemon-tools.cc/dtcc/deutsche-bersetzung-f-r-dt-p91784.html

In this thread you can find the new dll for 216 and the information why we have to make a new one.

[oder2]

Ukrainian language for Daemon Tools 4.10

Available at

http://oder.eleks.com/DaemonTools/4_10/UKR.dll

[Timmnuv]

List of codes

I've found a list of language codes here:
http://www.science.co.il/Language/Lo...?s=hexadecimal

[Timmnuv]

Translated to Croatian

I've just sent LocutusofBorg a Croatian translation.

[Devilman]

I did a couple of correction to my translation, thanks daemonui.
Here is the new link: http://rapidshare.com/files/51464189/ITA.dll.html

Bye

P.S.
Where I could find a list of the code for the differente language?

[kulmegil]

BTW: While doing the reverse engineering I discovered errors:
2007-08-21 Polish by kulmegil: id 7000 must be 00000415

Thanks, fixed.
I mirrored file on my site.

[daemonui]

Hi Le Chaland,

well 63000/63001 are additions I made by myself to identify the language and default codepage.

The others are new to 4.10

7001 original is English, so it could be Frensh (stay english) or Franзais (in Frensh).
If translated and one accidently changes to e.g Hebrew he hardly finds the way back to a known language. Therefore I felt free to extend the given English to <localized name> (<english name>).

And it was my purpose to add the new strings to the old section as well, since I don't wanna change my code if DT-guys change back to the other format
And it's (usually) no problem to have more than the required strings. BTW: There are more strings in 4.09 version than in 4.03 version and it works fine, maybe you did'nt recognize that

Best regards,
Harald
PS: Nowadays I could remove the 63000 section since it's almost equal to the 7000 section.

[Le Chaland]

Hello Daemonui.

I think you have a mistake in the french dll in your last pack :
In the section relating to versions 4.03 to 4.09 ( old format )

Normally this section contain only 232 lines.
Theses lines has nothing to make here:

7000, "0000040C%0"
7001, "Franзais (Frensh)%0" > Hey : French is the correct spelling ...
63000, "1252%0"
63001, "1036%0"
64512, "Licence personnelle%0"
64513, "Licence professionnelle%0"
64514, "Nom d'installation:%0"
64515, "Num&#233;ro de s&#233;rie:%0"
64516, "(non approuv&#233%0"
64517, "Entrer le num&#233;ro de s&#233;rie%0"
64518, "Nom d'installation (optionnel):%0"
64519, "Num&#233;ro de s&#233;rie incorrect.%0"

Let me know please if it's me who made the mistake but i don't think so :wink:

Here you will find the correct version :

http://spam-fighter.neuf.fr/files/traductions/1036.dll

Here you will get the dll in the original format of DAEMON Tools v4.10 :

http://spam-fighter.neuf.fr/files/traductions/FRE.dll

Here you will get an installer/uninstaller for my translation :

http://spam-fighter.neuf.fr/files/traductions/DAEMON_Tools_Lite_4.xx_Fr.zip

I don't know where you got these translation but i am sure it is not my work.
I know some guys who catch on the web my work, modify quickly somes lines and said that this is their one.
I am tired to regularly see theses facts
If only theses persons made a good work ...

Sincerly
Le Ch@land.

[daemonui]

I've updated my reverse engineering code and therefore I was able to update a some more languages in my translations:

http://www.hbreitner.de/daemonui/setup/dt4xlangdll.zip

I've only added the new strings found in contributed translations (except german which I did by myself).

All the languages below are included in the dt4xlangdll.zip and work with DT4.03 to DT4.10.

completed DT4.10
English, German, Finnish, French, Italian, Polish

based on DT4.03-4.09.01
Chinese/Simplified, Greek, Hungarian, Korean, PortuguesePortugal, Russian, Spanish, Vietnamese

based on DT4.03-4.08
Chinese/Traditional, Dutch, Estonian, Finnish, Japanese, Norwegian, Portuguese Brasilian, Portuguese Portugal, Swedish, Turkish, Ukrainian

based on DT3.xx
Bulgarian, Czech, Danish, Hebrew, Romanian, Slovak

Please check them out (hope they work well).

BTW: While doing the reverse engineering I discovered errors:
2007-08-21 Polish by kulmegil: id 7000 must be 00000415
2007-08-21 Italian by Devilman: id 7000 must be 00000410

Best regards,
Harald
____________________________________
Get free DaemonUI for daemon-tools at

http://www.hbreitner.de/daemonui

[Sha0lin]

Thank you ! I didn't think these lines were important nor did I notice that 40C => 1033

[bleili]

@Sha0lin
You must replace this 2 lines:


right is for line 7000 "0000040C" and for line 7001 "Franзais".

[Sha0lin]

I have a problem with the french translation i made. I know there is already one but i made my own before and i can't use it. I can see the language menu in DT but i can't use it when i'm using my dll. Can you explain me what's the problem ? You can download the dll here :

http://www.hotlinkfiles.com/files/264532_gkexa/FRE.dll

[daemonui]

Old DLLs 4.09.1 converted to 4.10 format

I have also modified and compiled my old language files to fit to the new languages

http://www.hbreitner.de/daemonui/setup/dt4xlangdll.zip

The good news is those files work for all versions 4.03 to 4.09.1 and 4.10.
Please check them out (hope they work well).

BTW: There is no need to rename the files.
Harald
____________________________________
Get free DaemonUI for daemon-tools at

http://www.hbreitner.de/daemonui

(edit: I'm still using the old string numbers)